Description
There's nothing quite like the ring of steel to tell you a shot landed, but push out to longer distances or add a few more people to the firing line and that satisfying ding gets tough to pin down. The Caldwell Flash Bang Target Hit Indicator solves that with a row of ten ultra-bright green LEDs that flash the instant your bullet meets the plate. No more squinting through a spotting scope wondering if that was your hit or the guy next to you.
Green was a smart call here. It reads clearly against dirt berms, brush, and shadow in a way red often washes out in, and the lights are bright enough to be picked up from thousands of yards away even under a blazing midday sun. The sensor is tuned to catch low-energy impacts too, so it'll register something as light as a .223 round tagging a plate way out at 1,000 yards.
Setting Up the Flash Bang on Your Steel
Installation is about as simple as it gets. The whole thing is self-contained and mounts to the back of your target with heavy-duty hook-and-loop material, so you can slap it on and pull it off in seconds without any tools. It's built to work with most steel targets 5 inches and larger, and the LED strip hangs just off the edge of the plate where the shooter can see it. There's a straightforward on/off switch, so you power it up when you're shooting and shut it down when you're done.
Battery Life That Keeps the Flash Bang Running
It runs on three AA batteries, which Caldwell includes in the box so you're ready to go out of the gate. Battery life is genuinely impressive, holding up through thousands of impacts before you'll need fresh cells. For folks running long-range steel, plinking sessions with .22 or .223, or busy ranges with multiple shooters, that kind of visual confirmation takes the guesswork out of the whole thing and lets you focus on the next shot.
Key Specifications
- Manufacturer: Caldwell
- Model: Flash Bang
- Manufacturer Part Number: 1198772
- UPC: 661120747529
- LED Count / Color: 10 ultra-bright green LEDs
- Power Source: 3 AA batteries (included)
- Battery Life: Over 5,000 impacts
- Target Compatibility: Steel targets over 5 inches
- Mounting: Heavy-duty hook-and-loop strap
- Impact Detection: Detects .223 hits at 1,000 yards
- Visibility: Thousands of yards in bright daylight
- Housing: Black plastic
- Length: 6.15 in
- Weight: 0.46 lb
What’s Included
- Caldwell Flash Bang Target Hit Indicator unit
- 3 AA batteries
- Hook-and-loop installation strap
Frequently Asked Questions
What size steel targets does the Flash Bang work with?
The Flash Bang is built to work with most steel targets 5 inches in diameter and larger. It attaches to the back of the plate using the included heavy-duty hook-and-loop strap, so the LED strip hangs just off the edge where you can see it. As long as your target has enough surface to mount it and transmits enough impact energy to trigger the sensor, you're good to go.
Will the Flash Bang pick up smaller calibers at long distance?
Yes. The impact sensor is tuned to detect low-energy hits, and Caldwell rates it to register something as light as a .223 round striking a plate out at 1,000 yards. That makes it a solid pick for long-range steel work and for lighter rounds like .22 where the ring can be hard to hear at distance.
How long do the batteries last on the Flash Bang hit indicator?
It runs on three AA batteries, which come included in the box. Battery life holds up through thousands of impacts before you'll need to swap in fresh cells, so a single set will carry you through plenty of range days. Just remember to flip the on/off switch to power it down when you're finished to stretch that life even further.
Can the LEDs be seen in bright sunlight?
That's exactly what the green LEDs are designed for. They're ultra-bright and readable from thousands of yards away, even under strong midday sun. Green also tends to stand out better against dirt berms and shadowed backstops than red does, which helps you catch the flash quickly.




Reviews
There are no reviews yet.