Description
If you've ever tried to hold a pair of 10x or 12x binoculars steady for more than a couple minutes, you already know the problem. The higher the magnification, the more every little hand tremor gets amplified, and the view turns soupy right when you're trying to pick out detail. This Bushnell adapter fixes that by giving your binoculars a solid connection to a tripod, monopod, or window mount.
How the Bushnell Tripod Adapter Works
The setup is about as straightforward as it gets. The adapter uses a 1/4-inch threaded bolt with a textured thumbscrew that spins into the tapped hole sitting between the objective bells on most full-size binoculars. From there, the base drops onto any standard tripod with a 1/4-20 socket. No tools, no fuss. Folks who've used it report getting binoculars mounted or pulled off in about half a minute, which matters when you're switching between handheld scanning and locked-in glassing.
Where This Bushnell Adapter Earns Its Keep
This is the kind of accessory that quietly makes a big difference for anyone doing long-duration viewing. Bird watchers, backyard deer watchers, stargazers, and folks tracking wildlife at distance all benefit from taking their hands out of the equation. Bushnell recommends it specifically for binoculars of 10x magnification or more, where stability isn't a luxury but the difference between a clear image and a blurry mess. It plays nice with roof prism and porro prism binoculars alike, as long as your pair is tripod-adaptable.
Built Simple, Built to Last
There's not much to overthink here. It's a compact, lightweight piece finished in black, and it does one job well without adding bulk to your kit. The slim post is designed to sit comfortably between the barrels without getting in the way of your interpupillary adjustment. Toss it in your pack and it's ready whenever you set up the tripod. Backed by Bushnell's two-year warranty, it's a low-cost upgrade that pays off every time you sit down for a long look.
Key Specifications
- Manufacturer: Bushnell
- Manufacturer Part Number: 161002CM
- UPC: 029757161000
- Color: Black
- Thread Size: 1/4-20
- Mount Type: Threaded bolt with textured thumbscrew
- Compatibility: Most full-size, tripod-adaptable binoculars
- Recommended For: Binoculars 10x magnification or higher
- Packaging: Clamshell
- Warranty: 2-year Bushnell warranty
- Shipping Weight: 0.2 lbs
What’s Included
- Bushnell binocular tripod adapter (black)
Frequently Asked Questions
Will the Bushnell tripod adapter work with binoculars from other brands?
Yes. It's built to work with most full-size, tripod-adaptable binoculars, not just Bushnell models. As long as your pair has the standard tapped hole between the objective bells, the adapter will thread right in. Roof prism and porro prism designs both work.
How does the adapter attach to my binoculars and tripod?
The adapter uses a 1/4-inch threaded bolt with a textured thumbscrew that spins into the socket between your binocular barrels. The base then drops onto any standard tripod with a 1/4-20 mount. No extra tools are needed, and most people can attach or remove their binoculars in about 30 seconds.
Do I really need a tripod adapter for my binoculars?
If you're using 10x magnification or higher, or doing any long-duration viewing, it makes a real difference. Higher magnification amplifies every hand tremor, so mounting your binoculars keeps the image sharp and steady. For birding, stargazing, or watching wildlife at distance, it takes the fatigue and shake out of the equation.
Can I use this with a monopod or window mount too?
Yes. Anything with a standard 1/4-20 socket will work, including monopods and window mounts. That flexibility makes it handy whether you're set up in a blind, in the field, or watching from the truck.



Reviews
There are no reviews yet.