0
0

Burris XTR Signature Scope Rings 1-inch 1.00″ Height Matte Black

UPC: 000381202314

$84.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Burris built the XTR Signature rings for the precision and tactical crowd, and the Pos-Align insert system is what sets them apart from a standard pair of rings. Instead of relying on a steel ring squeezing straight onto your scope tube, these use a polymer insert that cradles the tube and lets you correct for the small misalignments that show up in real-world setups. Off-center receiver holes, a base that isn't perfectly square, a rail that leans a hair one way or another, the inserts let you compensate so your scope sits true before you ever touch a turret.

What the Pos-Align Inserts Do on the XTR Signature Rings

Each set ships with a range of offset inserts so you can build in cant or center the tube without shimming or buying a tapered base. You get one set of 0 MOA concentric inserts, one set each of plus/minus 5 MOA and plus/minus 10 MOA, and two sets of plus/minus 20 MOA. Stack and combine them and you can create 0, 5, 10, 15, 20, 25, 30, or 40 MOA of cant in the mount itself. That is a big deal for long-range work, because it frees up your scope's internal elevation for actual dialing rather than eating it just to get on paper. The inserts also grip the tube over a wide surface area, which means solid holding power without the ring marks or scratches you can get from bare metal clamping down on a finish.

Mounting the 1-inch XTR Signature Rings

These are a two-piece set sized for 1-inch scope tubes with a 1.00-inch height measured from the base to the center of the tube, which puts them in the low range for most rifle builds. The self-centering dual steel clamps use a full cross-through connection that pulls the ring square on any width Picatinny rail and adds strength to the setup. They also fit most Weaver-style rails. Burris spec calls for 20 inch-pounds on the top ring screws and 45 inch-pounds on the cross bolts, so a decent torque wrench is worth having on hand when you install them.

The bodies are machined from rugged aluminum to keep weight down, finished in a clean matte black that pairs well with just about any optic. If you want a mounting solution that solves alignment headaches and squeezes every bit of adjustment out of your scope, this is one of the smartest ring sets Burris makes.

Key Specifications

  • Manufacturer: Burris
  • Manufacturer Part Number: 420231
  • UPC: 000381202314
  • Tube Diameter: 1 inch
  • Ring Height (base to tube center): 1.00 inch
  • Finish: Matte Black
  • Material: Aluminum body with dual steel clamps
  • Mount Type: Picatinny / most Weaver-style rails
  • Configuration: Two-piece ring set
  • Cant Range (with inserts): 0 to 40 MOA
  • Top Ring Screw Torque: 20 inch-pounds
  • Cross Bolt Torque: 45 inch-pounds
  • Insert Technology: Pos-Align offset inserts

What’s Included

  • Pair of Burris XTR Signature 1-inch rings (two-piece set)
  • One set of 0 MOA concentric Pos-Align inserts
  • One set of +/- 5 MOA Pos-Align inserts
  • One set of +/- 10 MOA Pos-Align inserts
  • Two sets of +/- 20 MOA Pos-Align inserts
  • Mounting hardware

Frequently Asked Questions

What size scope do the Burris XTR Signature rings fit?

This set is made for riflescopes with a 1-inch main tube. The height is 1.00 inch measured from the base to the center of the tube, which sits on the low end and works well for most standard rifle builds. If your scope has a 30mm or 34mm tube, you'll want the matching Burris XTR Signature set in that diameter instead.

How much cant can I build in with the Pos-Align inserts?

The included inserts let you create 0, 5, 10, 15, 20, 25, 30, or 40 MOA of cant right in the mount. You get a 0 MOA concentric set, a plus/minus 5 MOA set, a plus/minus 10 MOA set, and two plus/minus 20 MOA sets to mix and match. That built-in elevation means you can save your scope's internal turret travel for actual dialing at distance.

Will these rings scratch my scope tube?

No. The Pos-Align inserts are what contact the tube rather than bare metal, so they grip over a wide surface area for strong holding power while protecting the scope's finish. It's one of the main reasons shooters like the Signature line for nicer optics.

What rails do the Burris XTR Signature rings mount to?

They attach to Picatinny rails and most Weaver-style rails. The self-centering dual steel clamps use a full cross-through connection that squares the ring up on any width Picatinny rail and adds strength to the setup. A torque wrench is recommended, since Burris calls for 20 inch-pounds on the top ring screws and 45 inch-pounds on the cross bolts.

Additional information

UPC

000381202314

Manufacturer

Manufacturer Part Number

420231

Length

7

Package Height

2.0

Package Width

5.0

Product Type

Accessory-Rings/Mounts/Bases

Shipping Weight

0.16

Reviews

There are no reviews yet.

Be the first to review “Burris XTR Signature Scope Rings 1-inch 1.00″ Height Matte Black”