Description
The Burris Signature Zee Rings have earned their reputation the slow way, by holding zero in the field year after year. This set pairs solid steel ring halves with Burris's Pos-Align insert system, a self-centering polymer insert that pivots inside the ring to cradle your 34mm scope tube. The result is a wide band of contact that clamps down hard on the optic without the ring-marks and tube stress you get from cheaper metal-on-metal rings.
What Makes the Signature Zee Setup Different
Most rings just squeeze a scope between two chunks of metal. These do more. The pivoting Pos-Align inserts let the tube settle into a natural line even when your bases or receiver holes aren't drilled dead center. That means less flex on the scope body and a mount that stays put under recoil. The matte black finish cuts glare and shrugs off weather, which is exactly what you want on a hunting or range rig.
Built-In Alignment and Offset Correction
Here's where these rings really pull ahead. The 34mm set ships with multiple insert pairs, two sets of zero inserts plus a +10/-10 pair and a +20/-20 pair. Swapping or flipping the offset inserts lets you shift the scope tube inside the ring to gain back elevation or windage travel. If a scope has run out of adjustment or your bases sit a hair off, you can correct it here instead of shimming or buying tapered bases. It's a quiet feature that solves a very real headache.
Fitment and Setup Notes
These are Weaver-style rings, so they clamp onto standard Weaver and Picatinny-style cross-slot bases. The high ring height gives you a tall 1.25 inch height to center, making room for large-objective scopes to clear the barrel. Torque the top ring screws to 30 inch-pounds and the cross bolts to 65 inch-pounds for a secure, repeatable hold. Everything is backed by the Burris Forever Warranty.
Key Specifications
- Manufacturer: Burris
- Manufacturer Part Number: 420590
- UPC: 000381205902
- Model Series: Signature Zee
- Tube Diameter: 34mm
- Ring Height: High
- Height to Center: 1.25 in.
- Mount Type: Weaver-style
- Material: Solid Steel
- Finish: Matte Black
- Insert System: Pos-Align (zero, +10/-10, +20/-20)
- Top Ring Torque: 30 inch-lbs
- Cross Bolt Torque: 65 inch-lbs
- Quantity: Pair (2 rings)
- Warranty: Burris Forever Warranty
What’s Included
- Pair of Burris Signature Zee 34mm high rings (2 rings)
- Two sets of zero (0) Pos-Align inserts
- One set of +10/-10 offset inserts
- One set of +20/-20 offset inserts
- Mounting hardware
Frequently Asked Questions
Will the Signature Zee rings mark up my scope tube?
No, that's the whole point of the Pos-Align inserts. The polymer inserts cradle the scope tube and spread the clamping pressure over a wide surface, so you get a strong grip without the ring-marks and gouges that bare metal rings can leave. They hold the optic firmly while keeping the finish clean.
What bases do these Burris Signature Zee rings fit?
These are Weaver-style rings, so they clamp onto standard Weaver and Picatinny-style cross-slot bases. If your rifle has a Weaver or Picatinny rail or base system, these will mount right up. Just make sure your base matches the Weaver-style footprint.
How do the offset inserts help with a scope that ran out of adjustment?
The 34mm set includes zero, +10/-10, and +20/-20 insert pairs. By flipping or swapping the offset inserts in the front and rear rings, you can physically shift the scope tube to gain back elevation or windage travel. It's a handy fix for bases that sit slightly off-center or long-range setups where you've maxed out the turret adjustment.
What height are these and will they clear a large objective scope?
These are the high-profile version with a 1.25 inch height to center. That extra height gives large-objective scopes room to clear the barrel and most mounts without contact. For a 34mm tube with a big objective bell, high rings are usually the safe call.



Reviews
There are no reviews yet.