$649.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This BSF pre-fit barrel is built for the shooter who wants match-grade accuracy without lugging around a heavy bull-barreled rifle. It pairs a .223 Remington (22 caliber) chamber with a 22-inch length and a fast 1:7 twist, a combination that loves the heavier .22 caliber bullets and wrings the most out of a longer bearing surface at distance.
What sets BSF apart is how the barrel is put together. They start with a precision-turned 416R stainless steel match barrel, then jacket it in a roll-wrapped carbon fiber sleeve loaded under tension. Rather than gluing carbon straight to the steel like a traditional wrap, BSF leaves roughly a 95 percent air gap between the carbon and the steel, with contact only at a few points. The sleeve is perforated with rows of slots so air can circulate right against the hot steel. The payoff is a barrel that dumps heat quickly between strings and resists the delamination that can plague epoxy-bonded designs.
That tensioned carbon does double duty. It stiffens and stabilizes the thin steel liner to tame vibration and barrel whip, and because the carbon expands at the same rate as the 416R steel, the rifling stays straighter as things heat up. You end up with the rigidity of a heavy contour at a weight closer to a pencil barrel, which is a big deal for a walking hunter or anyone shooting long strings on the clock.
This is a pre-fit barrel, meaning the chamber and threads are already cut to spec. Even so, tolerances stack differently from action to action, so it is smart to verify headspace and confirm your action's thread pitch and bolt nose before install. If you are not comfortable checking headspace and torquing to spec yourself, a qualified gunsmith can have it dialed in quickly. BSF's carbon barrels have earned real credibility in the industry, showing up as original equipment on flagship precision rifles like the Springfield Model 2020 Waypoint, so you are getting a proven design here.
It is chambered in .223 Remington (22 caliber) with a 1:7 twist and a 22-inch length. The fast 1:7 twist is built to stabilize the heavier .22 caliber bullets, which makes this a strong pick if you plan to run heavier loads for accuracy at longer range.
As a pre-fit, the chamber and threads come cut to spec, but tolerances vary from action to action, so headspace should always be verified before shooting. If you have a barrel vise, the correct action wrench, and a Go gauge, a hands-on owner can handle it. If you are not set up for that, a qualified gunsmith can install and headspace it quickly.
BSF jackets a 416R stainless match barrel in a tensioned carbon fiber sleeve that only touches the steel at a few points, leaving roughly a 95 percent air gap between the two. The sleeve is perforated with slots so air circulates right against the hot steel and vents heat fast. That design lets the barrel cool between strings instead of trapping heat the way a fully bonded wrap can.
You get both. The tensioned carbon stiffens the thin steel liner and dampens vibration, giving you the rigidity of a heavy contour at a weight much closer to a pencil barrel. Because the carbon expands at the same rate as the steel, the rifling stays straighter as the barrel heats, which helps consistency shot to shot.
| UPC | 615678848450 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SF3IYT0271 |
You must be logged in to post a review.
Reviews
There are no reviews yet.