$749.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is BSF's carbon fiber jacketed AR-15 barrel chambered in 300 Blackout, cut to 16 inches with a 1:7 twist. If you've been eyeing a way to trim weight off the front of your build without giving up stiffness, this is the kind of barrel that gets people talking. It starts life as a precision-turned 416R stainless steel match-grade liner, then gets sleeved in roll-wrapped carbon fiber loaded under tension. The result is a barrel that carries like a lightweight pencil profile but behaves closer to a bull barrel when the heat climbs.
BSF does its jacketing a little differently than most carbon fiber makers. Instead of wrapping the steel in solid contact, they build in a large air gap between the sleeve and the liner and machine slots into the carbon so air can circulate and pull heat away fast. The carbon they use is engineered to expand at the same rate as the 416R steel, which keeps the rifling straight as things warm up and helps groups stay tight during longer strings. That same approach is why BSF has earned enough trust to supply barrels for factory rifles like the Springfield Model 2020 Waypoint.
The 1:7 twist is the fast-twist choice, and it favors the heavy subsonic bullets in the 190 to 220 grain range that 300 Blackout fans love running through a can. At 16 inches you get a barrel that handles both sides of the 300 BLK personality, quiet heavy subsonics for suppressed work and flatter-shooting supersonics for range time or hunting inside a couple hundred yards. It's a versatile length that keeps the cartridge in a familiar rifle configuration while still playing nice with a suppressor.
This is a barrel only, so plan on supplying the rest of your upper. BSF recommends a qualified gunsmith handle install and muzzle device work, and they publish a break-in procedure worth following to get the most out of the match liner. The whole barrel is carbon fiber and stainless, so rust and corrosion aren't a worry.
This barrel has a 1:7 twist, which is the faster of the common 300 BLK options. It's the twist that best stabilizes heavy subsonic bullets in the 190 to 220 grain range, so it's a strong pick for suppressed shooting. It will still run supersonic loads just fine for range work or hunting.
The big wins are weight and heat management. BSF wraps a 416R stainless match liner in a carbon fiber sleeve with an air gap and machined slots, so it stays light while venting heat quickly to help hold accuracy during longer strings. A premium steel barrel can match it on pure accuracy, but carbon buys you meaningful weight savings and faster cooling.
No, this is sold as a barrel only. You'll need to supply your own gas block, gas tube, muzzle device, and the rest of your upper. BSF recommends having a qualified gunsmith handle the install to protect the barrel and any warranty.
Yes, and that's a big part of why 300 Blackout exists. The 5/8×24 muzzle threads accept most 30-caliber suppressors, and the 1:7 twist is built around stabilizing heavy subsonic bullets. Just tune your load and gas system for reliable cycling since subsonics run at lower pressure.
| UPC | 615678983588 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SF3IYT0096 |
You must be logged in to post a review.
Reviews
There are no reviews yet.