$749.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
BSF built this 14.5-inch 300 Blackout barrel for people who want a lightweight AR-15 build that still holds a group when the barrel heats up. It starts life as a precision-turned 416R stainless steel match barrel, then gets jacketed in a roll-wrapped carbon fiber sleeve that's loaded under tension. What makes the BSF approach different is that roughly 95 percent of that carbon fiber never actually touches the steel, leaving an air gap that lets heat escape instead of getting trapped. Precision-cut openings in the sleeve add even more airflow, so you can run strings and get back on target quicker without watching your accuracy fall apart.
The numbers are the whole point of a carbon fiber barrel, and BSF delivers. Loading the sleeve under tension keeps the rifling straight as the barrel warms, and it means you get bull-barrel stiffness at a fraction of the weight. Folks who have built ultralight rifles around these barrels have reported groups in the sub-half-inch range at 100 yards, and reviewers consistently call out the fit, finish, and flawless carbon weave as genuinely premium.
This one is chambered in 300 AAC Blackout with a 1:7 twist, which is a smart pick if you're running heavy subsonic loads through a can. It uses a pistol length gas system, widely considered the sweet spot for 300 Blackout, and the muzzle is threaded 5/8×24 for your brake, flash hider, or suppressor. It's finished with an 11-degree target crown to protect the rifling and keep things consistent at the muzzle.
You'll need a 0.875-inch gas block to clear the stainless journal, and a pistol length gas tube to complete the setup. Because the carbon section shouldn't be clamped, a free-float handguard is the way to go. If you're not comfortable headspacing and torquing barrel nuts, it's worth handing the install to a gunsmith so everything lines up right the first time.
A 1:7 twist stabilizes the heavier bullets that 300 Blackout shooters lean on, especially heavy subsonic loads run through a suppressor. It also handles standard supersonic loads just fine, so you're covered across the board. For a suppressed subsonic setup, this is the twist you want.
You'll want a 0.875-inch gas block to fit the stainless journal, paired with a pistol length gas tube. Pistol length is the accepted sweet spot for 300 Blackout, so it keeps the rifle running smoothly across supersonic and subsonic ammo. A low-profile adjustable block is a nice touch if you plan to shoot suppressed.
BSF jackets a 416R stainless liner in a roll-wrapped carbon fiber sleeve loaded under tension, and about 95 percent of that carbon never touches the steel. That air gap, plus precision-cut vents in the sleeve, lets heat escape instead of building up. The carbon is engineered to expand at the same rate as the stainless, which helps prevent delamination and keeps groups consistent as the barrel warms.
Yes, a free-float handguard is the right call. Clamping down on the carbon fiber section can affect how the barrel performs, and free-floating lets it do its thing without contact. Just double-check your handguard clears the gas block during test fitting.
| UPC | 615678636415 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SF3IYT0095 |
You must be logged in to post a review.
Reviews
There are no reviews yet.