Description
A good 1911 trigger job lives and dies by the sear angle, and eyeballing that cut freehand is a fast way to ruin a good part. The Ed Brown Sear Jig takes the guesswork out of it by holding the sear at the correct angle so your stone rides true every stroke. It's a simple idea done right, machined from solid stainless steel so it shrugs off bench rust and lasts a lifetime.
What the Ed Brown Sear Jig Does on the Bench
The jig clamps your sear and presents it at the proper contact angle for stoning. An adjustable positioning screw lets you fine-tune the angle to add or shave a little trigger pull weight, so you're not locked into one setting. Pair it with a 6" x 1/2" x 1/2" stone and work the sear tip for a mirror finish, and you end up with the clean, crisp letoff that gives Ed Brown its reputation. It ships with a .020 shim, which comes in handy when you're working sears from different makers that don't sit quite the same in the fixture.
Why the Sear Jig Earns Its Spot in Your Kit
The larger, rounded body is meant to sit comfortably in your palm, though a lot of folks like to clamp it in a bench vise for steadier control. Feedback from people who've run it is consistent: it turns a nerve-wracking job into a straightforward one. Reports of dropping a heavy, gritty pull down into the 4.5 pound range with no creep are common, and plenty of first-time tinkerers pull it off on their own guns.
One thing worth knowing going in is that the printed instructions cover the full trigger job with plenty of helpful hints, and Ed Brown also keeps a detailed PDF walkthrough available if you want to read up before you start. Whether you're a working gunsmith or a weekend hobbyist looking to improve your carry gun, this is the one sear tool most 1911 builders reach for.
Key Specifications
- Manufacturer: Ed Brown
- Manufacturer Part Number: 951
- UPC: 800732951003
- Fits: 1911
- Material: Stainless Steel
- Width: 1 in (2.5 cm)
- Length: 4-7/16 in (11.1 cm)
- Included Shim: .020
- Adjustable Positioning Screw: Yes
- Country of Origin: Made in USA
What’s Included
- Ed Brown 1911 Sear Jig (stainless steel)
- .020 shim
- Complete printed instructions for the 1911 trigger job
Frequently Asked Questions
What does the Ed Brown Sear Jig actually do?
It holds your 1911 sear at the correct contact angle so you can stone it precisely instead of freehanding the cut. The adjustable positioning screw lets you fine-tune that angle to raise or lower trigger pull weight. The result is the right sear-to-hammer engagement for a clean, crisp break.
Do I need a special stone to use the sear jig?
Ed Brown recommends a 6" x 1/2" x 1/2" stone to work the sear tip to a mirror finish. Many folks step through a hard stone and finish with a fine Arkansas stone for the smoothest letoff. The stone is not included with the jig, so plan to have one on hand.
Is the Ed Brown Sear Jig easy enough for a first-timer?
Plenty of hobbyists have used it to clean up their own carry guns, taking a heavy, rough pull down to a smooth 4.5 pounds. It comes with printed instructions covering the full trigger job, and Ed Brown offers a detailed PDF walkthrough online. Take your time, read the steps, and it becomes a very manageable job.
Will it work with MIM sears from guns like Kimber or Taurus?
Yes, it handles a wide range of 1911 sears. The included .020 shim helps when a particular sear does not seat quite the same in the fixture, and some Taurus PT 1911 sears benefit from an added shim between the adjustment screw and the sear base. Just confirm how your specific sear sits before you start stoning.




Reviews
There are no reviews yet.