$79.95
217 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Sometimes the simplest mounting solution is the right one. The Breek Arms Direct Thread Universal Suppressor HUB threads into any suppressor with the industry-standard 1.375×24 HUB pattern and converts it to a direct-thread can for 5/8×24 barrels. No proprietary muzzle devices to buy for every rifle, no quick-detach mechanism to fuss with. Just spin your suppressor onto the barrel and get to work. For dedicated setups like a bolt gun or a rifle that keeps its can on full time, this is about as clean as suppressor mounting gets.
Breek Arms machines this hub from Grade 5 titanium, bringing the weight down to a scant 1.3 ounces. That matters more than you might think. Extra ounces hanging off the muzzle change how a rifle balances and swings, and a heavy mount is the first thing you notice on a lightweight hunting build. The Black DLC (Diamond-Like Carbon) coating adds serious surface hardness and corrosion resistance, so the threads and wrench flats hold up to repeated installs, carbon, and weather without looking beat up after a season.
The low-profile design adds only about a quarter inch to your suppressor's overall length, and the machining holds near-zero runout so your point of impact stays consistent every time you mount up. Installation is straightforward: thread it into the back of your HUB-compatible can, snug it down with a standard 1-1/4 inch wrench on the flats, and thread the whole assembly onto your barrel. Because there is no locking collar or ratchet system in the mix, there is also less to carbon lock or work loose during a long range day.
If you run a 5.56, 6mm, 6.5, or .30 caliber rifle with 5/8×24 threads and a HUB can, this little piece of titanium is one of those quiet upgrades that just works. Breek Arms also makes it in 1/2×28 and in 17-4 stainless if your setup calls for something different.
It fits any suppressor that uses the industry-standard 1.375×24 HUB thread pattern, which covers a huge range of modern cans from a variety of manufacturers. Check your suppressor's rear mount threading, and if it says 1.375×24 or HUB compatible, you are good to go. The host side threads onto any barrel with a 5/8×24 muzzle.
For a dedicated setup, yes, and in some ways it is the more repeatable option. There are fewer parts in the connection, near-zero runout keeps alignment consistent, and there is no locking mechanism to gunk up with carbon. The tradeoff is that swapping the can between rifles takes a little longer than a QD system.
The Grade 5 titanium version weighs just 1.3 ounces, which is noticeably lighter than the 17-4 stainless model at 2.1 ounces. Most of the mount sits inside your suppressor, so it only adds about a quarter inch to the can's overall length. It is one of the more compact HUB direct thread options out there.
Installation is simple. Thread the hub into the rear of your HUB-compatible suppressor and torque it down using the wrench flats, which take a standard 1-1/4 inch wrench. A dab of anti-seize on the HUB threads is a smart move if you plan on high round counts, since it makes removal easier down the road.
| UPC | 812296032142 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK4600TI |
| Color | Black |
| Model | |
| Shipping Weight | 0.094 |
You must be logged in to post a review.
Reviews
There are no reviews yet.