$54.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most muzzle devices want to be noticed. The Breek Arms VOID is built to do the opposite. It threads onto a 1/2-28 barrel and sits there looking like a simple thread protector, but hidden in that slim profile is the full lug and taper geometry for the Breek-LOK 3QD quick-detach suppressor system. Push, twist, and your HUB-equipped can locks on in seconds. Reverse the motion and you are back to a clean, uncluttered muzzle with nothing hanging off the end of your barrel.
Brakes are loud for everyone next to you, and flash hiders add length you may not want on a shorter build. The VOID skips all of that. At 1.25 inches long and 1.6 ounces, it adds almost nothing to your rifle, so the balance and handling stay exactly where you like them when you shoot unsuppressed. When it is time to run quiet, the tri-lug interface mates with the Breek-LOK 3QD HUB assembly, which fits most suppressors with standard 1.375×24 HUB threads. Alignment is repeatable, lockup is tight, and there is no slow threading session at the range while your barrel is hot.
Breek Arms machines the VOID from hardened steel and finishes it in black nitride, so it shrugs off heat, carbon, and weather without backing off or losing alignment over high round counts. A peel washer comes in the package for proper timing during install, and the whole thing is designed and made in the USA.
This version is cut for 1/2-28 threads, which covers the vast majority of .223 Rem and 5.56 NATO barrels. If you already run a HUB-compatible can, add the Breek-LOK 3QD HUB and the VOID turns any rifle in the safe into a quick-detach host without changing how it looks or carries. It is a simple, smart way to standardize suppressor mounting across multiple guns while keeping every muzzle as clean as the day it left the shop.
The VOID itself pairs with the Breek-LOK 3QD HUB assembly, which is sold separately and threads into suppressors with the industry standard 1.375×24 HUB pattern. If your can is HUB compatible, install the 3QD HUB in it and it will lock onto the VOID in seconds. Direct-thread cans without a HUB interface will not attach to this mount.
Yes, that is a big part of the appeal. The VOID functions like a low-profile thread protector when you are running unsuppressed, so there is no extra blast, length, or bulk at the muzzle. Attach the can only when you want it.
The system uses a tri-lug design with a taper seat. You press the HUB onto the VOID, rotate to engage the lugs, then a final partial turn seats the internal taper against the mount for a tight, repeatable lockup. The whole process takes around three seconds and needs no tools.
This version is threaded 1/2-28 for standard .223 and 5.56 barrels, and a peel washer is included for timing. Torque it to roughly 20 to 30 ft-lbs with an armorer's wrench, the same as most muzzle devices. No permanent attachment or gunsmithing is required.
| UPC | 812296031695 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK4335 |
| Caliber/Gauge | .223 REM/5.56 NATO |
You must be logged in to post a review.
Reviews
There are no reviews yet.