$79.95
202 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Plan B HUB One from Breek Arms solves a problem a lot of suppressor owners run into: you have a HUB-threaded can, but you want the speed and repeatability of a taper mount system without buying a whole new silencer. This little adapter threads into the standard 1.375×24 HUB pattern on your suppressor and converts it to run on Breek Arms Plan B muzzle devices. Put a Plan B brake or flash hider on each rifle in the safe, and now one can moves between all of them with a quick twist and a consistent lockup every time.
Machined from Grade 5 titanium, the HUB One weighs a scant 1.1 ounces, so it will not turn your carefully balanced rifle into a nose-heavy chore to swing. Dimensions are equally trim at just 0.70 inches long with a 1.49 inch outer diameter, meaning it tucks up against the back of your suppressor instead of hanging out like a bolted-on afterthought. The black DLC coating is the same diamond-like carbon treatment you see on high-end bolt carriers, giving the titanium a hard, wear-resistant surface that shrugs off carbon, heat, and rough handling.
The whole point of a taper mount is consistency, and Breek Arms machines the HUB One to tight tolerances so the suppressor indexes the same way on the muzzle device shot after shot. That precision alignment keeps point of impact shift to a minimum when you pull the can off for cleaning or move it to another rifle, which matters a lot more than spec-sheet bragging rights when you are trying to hold zero.
Breek Arms offers Plan B muzzle devices in common thread pitches like 1/2×28 and 5/8×24, so covering a .223 carbine and a .30 cal rifle with one suppressor is simple. If your can has standard HUB threads, this mount is one of the lighter and slimmer ways to bring it into a quick-attach system without adding meaningful length or weight.
If your suppressor uses the industry-standard 1.375×24 HUB thread pattern, this mount threads right in. That covers a huge range of modern cans from most major manufacturers. Just confirm your suppressor is HUB-compatible before ordering.
Yes. The HUB One converts your suppressor to the Breek Arms Plan B taper mount system, so it locks onto Plan B muzzle devices like the Echo brakes offered in 1/2×28 and 5/8×24 thread pitches. The muzzle devices are sold separately, and putting one on each rifle lets you swap a single can between guns quickly.
Very little. The Grade 5 titanium construction keeps it at 1.1 ounces, and the mount is only 0.70 inches long with a 1.49 inch outer diameter. It sits nearly flush against the back of the can, so your rifle keeps its balance and handling.
This BRK4401 model is Grade 5 titanium with a black DLC finish, built for keeping weight down. Breek Arms also makes the HUB One in 17-4 stainless steel with a Nitride finish for folks who want maximum durability on hard-use guns. Both run the same 1.375×24 HUB thread and Plan B taper interface.
| UPC | 812296031732 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK4401 |
| Color | Black |
| Model | |
| Shipping Weight | 0.09 |
You must be logged in to post a review.
Reviews
There are no reviews yet.