$99.99
12 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Breek Arms Sledgehammer is the AR-10 / LR-308 version of one of the most talked-about gas-busting charging handles going right now. It's an ambidextrous unit machined from aerospace-grade 7075-T6 aluminum and finished with a Type III hard-coat anodize, so it holds up to hard use and heavy round counts. At roughly 1.4 ounces with a 2.59-inch latch width, it swaps in as a straight drop-in upgrade with no gunsmithing needed.
The whole reason this handle exists is gas. When you run a suppressor on a direct-impingement .308, back pressure sends a lot of hot gas and carbon straight back through the upper and around the charging handle, right into your face. The Sledgehammer stacks up several features to fight that: a raised rear shelf that covers the back of the upper, a keyway cut to interrupt gas flow, internal baffling inside the stem to slow the gas down, and ported back-pressure holes with aggressive relief cuts on the top and bottom to steer everything out to the sides. Reviewers who have run it head-to-head against pricier boutique handles have called out how well it diverts gas and particles compared to the competition.
Breek gave this thing serrated latches and a wider footprint, so grabbing it is quick and positive whether you're bare-handed or running gloves. The setback latch design also plays nice with larger optics, which is a common headache on .308 builds. It's ambi out of the box, so lefties and righties both get an easy, natural pull.
This handle fits DPMS-pattern AR-10 / LR-308 uppers, covering both Gen1 and Gen2 style receivers. That includes platforms like the Aero M5, DPMS Gen1 high and low, Knights SR25, Stag-10, Armalite AR10, Daniel Defense DD5, Sig 716, Ruger SFAR, Savage MSR10, S&W M&P10, and plenty of others. If you're running a suppressed big-bore AR and want to keep your vision clear, this is one of the simplest upgrades you can make. Made in America.
It's built for DPMS-pattern AR-10 / LR-308 uppers and covers both Gen1 and Gen2 style receivers. That includes popular platforms like the Aero M5, DPMS Gen1, Knights SR25, Stag-10, Armalite AR10, Daniel Defense DD5, Sig 716, Ruger SFAR, Savage MSR10, and S&W M&P10. If your upper follows the DPMS or Armalite AR10 pattern, it should drop right in.
That's its main job. It uses a raised rear shelf, a keyway cut, internal baffling in the stem, and ported back-pressure holes with relief cuts to steer gas out and away from you. It makes the biggest difference on suppressed rifles, where reviewers have found it outperforms several more expensive handles at diverting gas and carbon.
Not at all. It's a straight drop-in swap with no gunsmithing needed. You break the rifle open, pull your old charging handle, slide the Sledgehammer into the receiver groove, reinsert your bolt carrier group, and button it back up.
Yes, it's fully ambi, so you can grab and pull from either side. The serrated latches and wider footprint make manipulation quick and secure even with gloves on, and the setback latch design leaves room for larger optics.
| UPC | 812296031480 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK6010 |
| Color | Black |
| Model | |
| Product Type | Charging Handle |
| Shipping Weight | 0.12 |
You must be logged in to post a review.
Reviews
There are no reviews yet.