$64.99
32 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Breek Arms Warhammer Mod2 is a drop-in ambidextrous charging handle built for AR-10, LR-308, and SR-25 pattern rifles. It swaps out that flimsy mil-spec handle you've been fighting with and gives you wide, set-back latches you can grab from either side, even with gloves on. Machined entirely from 7075-T6 aluminum, it shrugs off the twisting force that bends cheaper handles when you charge one-handed, and the whole thing tips the scale at just over an ounce so you're not adding any real weight up front.
The big story with the Mod2 revision is gas management. Breek Arms added relief cuts along the top and bottom of the stem that vent extra gas out the sides and away from your face, and they raised the ledge on the back to better seal the rear of the upper. If you run a suppressor or shoot an overgassed .308, you'll notice the difference in how much less blowback ends up in your eyes. The set-back latches also sit far enough forward to clear bulky optics and mounts that crowd up close to your eye box.
This handle is cut for DPMS Gen1 and Armalite AR10 pattern uppers, which covers a huge chunk of the .308 market. That includes rifles like the Aero M5, Knights Armament SR25, Stag-10, Armalite AR10, Daniel Defense DD5, Savage MSR10, S&W M&P10, and Gen3 PSA PA-10 and PA-65 builds. Just remember this is the larger .308 size, so it won't fit a standard AR-15 upper.
Swapping it in takes a couple of minutes and no tools. Pop the takedown pin, hinge the upper open, pull your old handle and bolt carrier, then slide the Warhammer Mod2 and BCG back in together and button it up. A quick wipe of oil on the rails before that first range trip keeps everything moving smooth. Breek Arms backs it with a lifetime replacement policy, so it's built to run hard for the life of the rifle.
It's designed for DPMS Gen1 and Armalite AR10 pattern uppers, which covers most of the .308 market. That includes popular builds like the Aero M5, Knights SR25, Stag-10, Daniel Defense DD5, and Gen3 PSA PA-10 and PA-65 rifles. If you're unsure about a specific model, check whether your upper follows the DPMS or Armalite pattern before ordering.
That's the main upgrade in the Mod2 version. The relief cuts on the top and bottom of the stem vent extra gas out the sides, and the raised rear ledge helps seal off the back of the upper. You'll notice it most when running a suppressor or shooting an overgassed .308.
Not at all, and you don't need any tools. Pop the takedown pin, open the upper, pull your old handle and bolt carrier, then slide the Warhammer Mod2 and BCG back in together and close it up. A light coat of oil on the rails before your first outing helps it run smooth.
No, this is the larger AR-10/.308 size and won't fit an AR-15 upper. Breek Arms makes a separate AR-15 version of the Warhammer if that's the platform you're building. Make sure you match the handle size to your rifle.
| UPC | 812296030865 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK530RGREEN |
| Model | |
| Style | Short |
You must be logged in to post a review.
Reviews
There are no reviews yet.