0
0

Redding BR-30 Competition Powder Measure 03300 | 10-50 Grain

UPC: 611760033001

$251.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding BR-30 Competition Powder Measure is one of those tools that reloaders reach for when charge-to-charge consistency really matters. It was Redding's first true competition model, engineered specifically for benchrest cartridges sitting right around 30 grains, which is exactly where the BR-30 name comes from. To get there, Redding built an entirely new drum and metering unit rather than just tweaking an existing design.

The heart of this measure is its hemispherical metering plunger, shaped like the bottom of a test tube. That cup geometry reduces irregular powder settling and tightens up the uniformity from one throw to the next. The metering cavity diameter was reduced as well, narrowing the charging window to a low of around 10 grains up through roughly 50 grains depending on powder density. It isn't meant to be a do-everything measure, and that's the point. By focusing on a tighter range, it does that range exceptionally well.

What Sets the BR-30 Apart on the Bench

A few thoughtful details separate this from a standard measure. The micrometer metering chamber adjusts with zero backlash so your setting won't creep or work loose, and a positive rotor lock holds that setting in place. The powder hopper uses a baffle to keep charges uniform as the column drains down. There's also a special rotating operating handle that runs slightly heavier than usual, which helps you maintain a smooth, repeatable stroke every single time.

Getting the Most From Your BR-30

Reloaders who run this measure tend to see excellent results with ball and fine-grain powders, often holding within a tenth of a grain once technique is dialed in. Like any thrower, long extruded stick powders are tougher to cut cleanly, so a consistent cadence on the handle matters. It mounts to the front of a solid bench with the included bracket, or threads into a press or stand using standard 7/8-14 threads. Many benchrest and varmint shooters keep it dedicated to a single load and let it earn its keep match after match. Note that Redding powder measures are not intended for use with black powder.

Key Specifications

  • Manufacturer: Redding
  • Model: Competition BR-30
  • Manufacturer Part Number: 03300
  • UPC: 611760033001
  • Type: Competition Powder Measure
  • Charge Range: Approx. 10 to 50 grains
  • Optimized Charge Weight: Approximately 30 grains
  • Metering Plunger: Hemispherical cup design
  • Micrometer: Zero backlash adjustable metering chamber
  • Hopper: Baffled powder reservoir for uniform charges
  • Rotor: Positive lock to hold setting
  • Mounting Threads: Standard 7/8-14
  • Intended Use: Large handgun to medium rifle cases
  • Color: Green

What’s Included

  • Redding Competition BR-30 Powder Measure
  • Bench-front mounting bracket
  • 22 to 50 caliber drop tube
  • Instruction sheet

Frequently Asked Questions

What charge range does the Redding BR-30 cover?

The BR-30 meters from a low of approximately 10 grains up to a maximum of around 50 grains, depending on powder density. It's optimized to perform its best right around 30 grains, which is how it got the BR-30 name. If your loads consistently fall in that window, it's an excellent fit, though it isn't designed to cover the very light or very heavy charges a wider-range measure would.

How accurate is the BR-30 with different powders?

It shines with ball and fine-grain powders, where many reloaders report holding within about a tenth of a grain once their technique is dialed in. Long extruded stick powders are harder for any measure to cut cleanly, so a steady, repeatable stroke on the handle makes a real difference. Spot checking against a good scale every ten to fifteen charges is always smart practice.

How do you mount the Redding BR-30?

It comes with a bench-front mounting bracket that lets you clamp it to the edge of a solid bench. You can also thread it into a reloading press or an optional stand using the standard 7/8-14 threads. For the most consistent throws, keep it rigidly mounted on a bench that isn't subject to vibration or accidental bumps.

What cartridges is the BR-30 best suited for?

It's built for large capacity handgun cases and small to medium capacity rifle cartridges, which makes it popular for benchrest and varmint loads as well as handgun silhouette work. The included drop tube handles 22 through 50 caliber. Keep in mind Redding powder measures are not intended for use with black powder.

Additional information

UPC

611760033001

Manufacturer

Manufacturer Part Number

03300

Reviews

There are no reviews yet.

Be the first to review “Redding BR-30 Competition Powder Measure 03300 | 10-50 Grain”