0
0

Burn Proof Gear Primal Heavy Suppressor Cover 8.25×1.6 Black

UPC: 680660790970

$225.00

15 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A hot suppressor will melt sling webbing, scorch pack material, and leave a mark on your leg you won't forget. Burn Proof Gear built the Heavy suppressor cover to solve all of that, and this one is cut at 8.25 inches by 1.6 inches, which is the right size for the Dead Air Primal. BPG sizes their covers about a half inch longer than the can itself so the ends cinch down around the body for what they call a No-Slip Fit. Once it's snugged up, it stays put through recoil, transitions, and strings of fire that would walk a lesser cover right off the end of your suppressor.

What Makes the Heavy Cover Different

This is a two-piece system. The outer shell is DuPont Kevlar diamond weave ripstop rated to 1000 degrees Fahrenheit, and underneath sits a fiberglass mesh sleeve that handles temps well beyond that. Between the two layers you get real insulation, not just a fabric sock. That construction is why the Heavy line is trusted for hard semi-auto use and holds up where thinner covers start to cook. It's made in the USA from aerospace and military grade fire retardant materials, and BPG backs their covers for life. The inner sleeve is also replaceable, so the cover keeps earning its keep for years.

More Than Burn Protection for Your Primal

The heat shielding is the obvious draw, but there's more going on here. A bare can throwing heat straight up creates mirage that wobbles your sight picture on anything past close range, and this cover knocks that down noticeably. It also cuts the IR signature a hot suppressor puts off, which matters if you run night vision. And on a big-bore can like the Primal, keeping the outer diameter reasonable counts. This cover adds minimal bulk, slides on and off without tools, and the black Kevlar looks right at home on just about any rifle. If you finally got your hands on a Primal, this is the piece that lets you use it hard without babying it.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Manufacturer Part Number: BPG-SCC-H-8-1-6-BLK
  • UPC: 680660790970
  • Cover Length: 8.25 in
  • Cover Diameter: 1.6 in
  • Fits: Dead Air Primal suppressor
  • Color: Black
  • Outer Material: DuPont Kevlar diamond weave ripstop
  • Outer Heat Rating: 1000 F
  • Inner Liner: Fiberglass FR mesh sleeving
  • Design: Two-piece, cinching No-Slip Fit
  • Made In: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy suppressor cover, 8.25×1.6, black
  • Inner fire-retardant fiberglass mesh sleeve

Frequently Asked Questions

Will this Burn Proof Gear cover fit my Dead Air Primal?

Yes, this is the size BPG cuts specifically for the Primal. The 8.25 inch length runs about a half inch longer than the can so the ends cinch down around the body, and the 1.6 inch diameter matches the Primal's tube. Just note that fitment assumes a standard setup, since longer muzzle devices or end caps can change how much of the can sits exposed.

How much heat can the Primal suppressor cover handle?

The Kevlar outer shell is rated to 1000 degrees Fahrenheit, and the fiberglass inner sleeve handles even higher temps. That's enough for hard range sessions, though BPG recommends letting things cool once the cover gets too hot to touch, which typically happens around 90 rounds fired in quick succession. As a rough rule, a suppressor gains about 7 degrees per round with 5.56.

Does a suppressor cover really reduce heat mirage?

It does, and it's one of the main reasons precision guys run them. A bare hot can radiates heat straight up through your sight picture and makes the image shimmer. The insulating layers on this cover trap and slow that heat release, keeping your optic view clear during longer strings. It also cuts down the IR glow a hot suppressor gives off under night vision.

Will the cover slip or rotate during rapid fire?

No, that's the point of BPG's No-Slip Fit design. The cover is cut slightly longer than the suppressor so both ends cinch down tight around the can, and the inner mesh sleeve grips the tube. Once installed correctly it stays planted through recoil and sustained fire without walking forward.

Additional information

UPC

680660790970

Manufacturer

Manufacturer Part Number

BPG-SCC-H-8-25-1-6-BLK

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Primal Heavy Suppressor Cover 8.25×1.6 Black”