0
0

Burn Proof Gear Suppressor Cover 8″ x 1.6″ Black – Hybrid 46M/Wolfman

UPC: 680660790901

$225.00

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A big-bore can heats up in a hurry. A few mags through a Hybrid 46M or a long-configuration Wolfman and you have a branding iron hanging off your muzzle, ready to scorch your sling, your rifle bag, or your forearm during a transition. This Burn Proof Gear cover is cut to 8 inches by 1.6 inches, the size BPG calls out for the Hybrid 46M and the Wolfman run long, so it hugs the can instead of flopping around like a loose sock.

How This BPG Suppressor Cover Handles the Heat

The build is a two part system. The outer shell is Kevlar fabric rated to 1000 degrees Fahrenheit, which keeps it full-auto capable, while the inner fiberglass mesh sleeving shrugs off temps up to 2000 degrees. That sleeving is replaceable too, so when it eventually wears from hard use you swap it out instead of buying a whole new cover. Once installed, the whole setup only adds about a quarter inch to the diameter of your can, so it stays trim enough for most handguards and rifle cases.

A No-Slip Fit That Stays Put

Burn Proof Gear cuts their covers roughly a half inch longer than the suppressor so the ends cinch down behind the end caps. That is what keeps the cover from creeping forward or spinning under recoil, a common gripe with cheaper wraps. Beyond burn protection, the cover kills the heat mirage that ruins your sight picture during longer strings and tamps down the IR glow your can throws under night vision. These covers are made in the USA, combat proven, and backed by a lifetime guarantee, which is why they show up on so many hard-use rifles. If your 46M or Wolfman rides on a working gun, this is cheap insurance for your skin and your kit.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Manufacturer Part Number: BPG-SCC-H-7-25-1-5-BLK
  • UPC: 680660790901
  • Cover Length: 8 in
  • Fits Suppressor Diameter: 1.6 in
  • Color: Black
  • Fits: SilencerCo Hybrid 46M, Dead Air Wolfman (long configuration)
  • Outer Material: Kevlar fabric, rated to 1000°F
  • Inner Liner: High-temp fiberglass mesh sleeving, rated to 2000°F
  • Full-Auto Rated: Yes
  • Construction: Two-piece design (cover plus replaceable FR sleeving)
  • Added Diameter When Installed: Approximately 0.25 in
  • Made In: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear suppressor cover, 8" x 1.6", black
  • Fire-retardant inner mesh sleeving (cut to length during installation)

Frequently Asked Questions

Will this Burn Proof Gear cover fit my Hybrid 46M or Wolfman?

Yes, the 8" x 1.6" size is the one BPG's fitment chart pairs with the Hybrid 46M and the Wolfman in its long configuration. Keep in mind that muzzle devices, end caps, and mounts can change your overall length, so it is worth measuring your can as configured before ordering. If your Wolfman is set up short, you would want the 5.5" version instead.

Is this suppressor cover full-auto rated?

The black Kevlar outer shell is rated to 1000 degrees Fahrenheit and is full-auto capable, while the fiberglass inner sleeving handles up to 2000 degrees. The general guideline is around 90 rounds of hard fire before letting things cool. If the cover is too hot to touch, give it time to cool down before you keep running it hard.

How does the cover stay in place on the suppressor?

BPG cuts the cover about a half inch longer than the can so the ends cinch down behind the front and rear end caps, which is what they call the no-slip fit. Installed correctly it should not creep forward or rotate under recoil. The inner mesh sleeving gets trimmed to length during setup, so measure it on the suppressor before cutting.

Does a suppressor cover help with heat mirage?

It makes a real difference. Once a can gets hot, the shimmer rising off it distorts your sight picture, especially behind magnified optics during longer strings. This cover traps that heat so your reticle stays clear, and it also reduces the IR signature your suppressor gives off under night vision.

Additional information

UPC

680660790901

Manufacturer

Manufacturer Part Number

BPG-SCC-H-8-1-6-BLK

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Suppressor Cover 8″ x 1.6″ Black – Hybrid 46M/Wolfman”