Description
Anyone who has run a can hard knows how fast it turns into a branding iron. A few mags of steady fire and your suppressor is too hot to touch, radiating mirage across your optic and cooking anything it rests against. Burn Proof Gear built this Heavy cover sized for the Dead Air Sandman-S, at 7.25 inches long by 1.5 inches in diameter, so it wraps the can end to end and cinches down behind the front and rear for what BPG calls a No-Slip Fit. That extra bit of length is the whole trick. Instead of relying on friction alone, the cover grabs the shoulders of the suppressor and locks in place, which is why these stay put when so many cheaper wraps creep forward under recoil.
Two Layers Doing Two Different Jobs
The Sandman-S cover is a two-piece system. The inner liner is fiberglass mesh sleeving rated to a max operating temperature of 2000 degrees Fahrenheit, and it sits directly against the tube to take the brunt of the heat. Over that goes the DuPont Kevlar diamond weave ripstop outer, built from aerospace-grade fire retardant materials. Because the liner is a separate, replaceable piece, the cover itself lasts a lot longer than single-layer wraps that cook from the inside out. Even with both layers on, the whole package adds no more than about a quarter inch to the diameter of your can, so it still clears most handguards and rail-mounted gear.
Why Run a Cover on Your Sandman-S at All
Burn protection is the obvious answer, and this cover keeps a hot can from scorching your leg, sling, pack, or truck seat during transitions and transport. But there are two quieter benefits worth mentioning. First, it kills the heat mirage that boils up off a bare suppressor and blurs your sight picture on precision work. Second, it cuts down the IR signature a hot can throws under night vision. These covers are full-auto rated, made in the USA, and backed by a lifetime guarantee, which is about as much confidence as a company can put behind a piece of fabric that lives on a 1000 degree tube.
Key Specifications
- Manufacturer: Burn Proof Gear
- Manufacturer Part Number: BPG-SCC-H-7-1-6-BLK
- UPC: 680660790758
- Designed For: Dead Air Sandman-S
- Cover Length: 7.25 in
- Fits Suppressor Diameter: 1.5 in
- Color: Black
- Outer Material: DuPont Kevlar diamond weave ripstop
- Inner Liner: Fiberglass mesh sleeving, 2000 F max operating temp
- Construction: Two-piece design with replaceable inner liner
- Added Diameter: No more than 0.25 in over bare suppressor
- Fire Rating: Full-auto rated
- Made In: USA
- Warranty: Lifetime guarantee
What’s Included
- Burn Proof Gear Suppressor Cover Heavy outer cover, black
- Fiberglass mesh inner liner sleeving
Frequently Asked Questions
Will this cover fit suppressors other than the Dead Air Sandman-S?
Yes, as long as the can matches the sizing. This cover is built for suppressors 1.5 inches in diameter, and the 7.25 inch length is meant to run about a half inch past the body of the can so it can cinch around both ends. If your suppressor is close to 6.75 inches long and 1.5 inches wide, you should get a proper fit.
How hot can the Burn Proof Gear Heavy cover handle?
The fiberglass mesh inner liner has a max operating temperature of 2000 degrees Fahrenheit and sits directly against the tube. The Kevlar outer layer handles up to roughly 1400 degrees, which works out to around 180 rounds of M855 fired at a steady clip. It is full-auto rated, but like any cover, you should let it cool once it gets too hot to touch before hammering it again.
Will the cover slide around or walk forward under recoil?
Not when it is installed correctly. The cover is intentionally sized slightly longer than the Sandman-S so it cinches down behind the front and rear of the can, which is what Burn Proof Gear calls their No-Slip Fit. If the cover slides forward during fire, that is a sign it was not installed properly rather than a fault with the design.
Does the Sandman-S suppressor cover add much bulk to the can?
Very little. With both the liner and outer cover installed, the total diameter grows by no more than about a quarter inch, so a 1.5 inch can maxes out around 1.75 inches. That keeps it slim enough to clear most handguards and avoid snagging on gear.




Reviews
There are no reviews yet.