Description
Titanium cans heat up fast, and the FLOW 556 Ti and FLOW 762 Ti are no exception. A few quick mag dumps and that tube will brand your forearm, melt your sling, or scorch whatever it rides against in the truck. This Burn Proof Gear heavy cover is cut to 5.75 by 1.8 inches to match the FLOW Ti series exactly, so it hugs the can the way a generic wrap never will. BPG backs it with their no-slip fit guarantee, and once it is seated it stays put through recoil, heat cycles, and rough handling.
Two Layers Doing the Work on Your FLOW Ti
The cover is a two-part system. The outer shell is DuPont Kevlar in a diamond weave ripstop, and in FDE it carries a heat rating of 1000 degrees Fahrenheit with full-auto capability. Underneath sits a fiberglass FR sleeve rated to 2000 degrees that takes the direct contact with the tube. That inner sleeve is the wear item, and since it is replaceable you can refresh the cover instead of buying a whole new one when it eventually cooks through. Smart design that stretches the life of your gear.
Built Around Flow-Through Technology
HUXWRX cans vent gas forward through the end cap, and this cover respects that. The sizing leaves the front of the suppressor exposed so the Flow-Through system keeps working exactly as designed, no trapped gas, no interference. Installed, the cover adds no more than a quarter inch to the overall diameter, so it stays slim enough to clear handguards and fit in most rifle cases without a fight.
Range Notes on the BPG FLOW 556/762 Ti Cover
Made in the USA from aerospace and military grade fire retardant materials, this is the same patented design BPG has proven on hard-use guns for years. One tip worth passing along: if the setup gets too hot to touch, give it a few minutes to cool before running another string. That habit keeps both the cover and the can happy for the long haul. The FDE colorway pairs well with tan and camo builds and hides carbon staining better than lighter fabrics.
Key Specifications
- Manufacturer: Burn Proof Gear
- Manufacturer Part Number: BPG-SCC-H-5-75-1-8-FDE
- UPC: 680660790437
- Fits: HUXWRX FLOW 556 Ti / FLOW 762 Ti
- Cover Size: 5.75 in x 1.8 in
- Color: Flat Dark Earth (FDE)
- Outer Material: DuPont Kevlar diamond weave ripstop
- Outer Cover Heat Rating: 1000 degrees F
- Inner Sleeve: Replaceable fiberglass FR sleeving
- Inner Sleeve Heat Rating: 2000 degrees F
- Added Diameter Installed: 0.25 in or less
- Full Auto Capable: Yes
- Fit Style: No-slip fit, patented design
- Made In: USA
What’s Included
- Burn Proof Gear heavy suppressor cover, FDE, 5.75 x 1.8 in
- Fire retardant inner sleeving
Frequently Asked Questions
Will this Burn Proof Gear cover fit both the HUXWRX FLOW 556 Ti and FLOW 762 Ti?
Yes, the 5.75 by 1.8 inch cut is sized for the FLOW Ti series and works on both models. It will also fit other suppressors matching those dimensions, but the pattern was measured specifically around the HUXWRX FLOW tubes for a snug, no-slip fit.
Does the cover block the Flow-Through venting on the end cap?
No. The sizing intentionally leaves the front of the can exposed so gas can exit through the vented end cap the way HUXWRX designed it. You get the heat protection without changing how the suppressor performs.
How hot can this cover get before it becomes a problem?
The FDE Kevlar outer shell is rated to 1000 degrees Fahrenheit and the fiberglass inner sleeve handles up to 2000 degrees, so it is full-auto capable. That said, the smart move is to let things cool anytime the setup is too hot to touch, which usually happens somewhere around 90 rounds fired in quick succession.
What happens when the inner sleeve wears out?
That is the whole point of the two-part design. The fiberglass sleeving takes the direct heat and abuse, and when it eventually wears through you replace just the sleeve rather than the entire cover. It keeps the Kevlar shell in service a lot longer than a single-layer wrap would last.




Reviews
There are no reviews yet.