$19.99
23 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you have ever scrubbed a barrel with an old abrasive paste and had no idea whether you were making progress, Chameleon Gel fixes that headache in a clever way. This is a patented gel that combines chemical and mechanical cleaning action into one tube, and the standout trick is that it changes color on the patch to show you what's actually coming out of your bore. Blue or green means copper, black means carbon, gray means lead or moly, and white means you're done. Instead of guessing, you get a real read on the condition of your barrel every pass.
Traditional pastes lean on aluminum oxide grit and turn black no matter what, whether the bore is loaded with copper, packed with carbon, or already spotless. That leaves you scrubbing blind, and a lot of folks end up overworking their barrels because of it. Chameleon Gel uses a micron-sized, silica-based polish that opens up an activation site for the chemistry to do the heavy lifting, so it clears fouling in about half the time. It's ammonia free, odor free, biodegradable, and the manufacturer rates it 100% barrel safe for all barrel types.
This stuff shines on the tough jobs: a heavily fouled bore, stubborn copper, or that carbon ring building up in the throat. The gel comes ready to use in a 2 oz squeeze tube with a dispensing tip, so there's no mixing involved. Coat a jag with an undersized patch or a wrapped nylon brush, short-stroke the trouble spots, let it sit a few minutes, then watch the colors tell the story. It pairs really well with the rest of the Bore Tech lineup like C4 Carbon Remover, Cu+2 Copper Remover, or Eliminator to wet-patch before and flush after.
A little goes a long way with this tube, and shooters chasing accuracy out of competition and precision rifles tend to keep it on the bench for exactly that reason. When the patch finally comes out white, you know the work is done.
As you work the gel through the bore, the patch changes color to show what's fouling the barrel. Blue or green points to copper, black means carbon, and gray indicates lead or moly. When the gel stays white, your bore is clean and you're finished.
Bore Tech rates it 100% safe for all barrel types when used as directed. It uses a micron-sized silica polish paired with chemical cleaning rather than harsh aluminum oxide grit, which helps you avoid overworking the bore. Most folks still use it sparingly the way you would any abrasive, and applying it on a patch or nylon brush is the way to go.
You can use it on its own, but it works best as part of a routine. Wet-patch the bore first with something like C4 Carbon Remover, Cu+2 Copper Remover, or Eliminator to lift loose fouling, then apply the gel to the stubborn spots. After the gel does its job, flush it out with a couple more wet patches and finish with dry patches.
A little goes a long way since you only need a thin coat on a patch or brush per cleaning. For most people running a few rifles, a single 2 oz tube covers a good stretch of range sessions. It's a concentrated gel, so you're not burning through it like a liquid solvent.
| UPC | 667739980524 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BTCK40002 |
You must be logged in to post a review.
Reviews
There are no reviews yet.