$169.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is the genuine Bond Arms 3.5-inch matte barrel set chambered in .45 Colt/.410, built to slide right onto your original Bond Arms hand cannon frame. It runs a 3-inch chamber, which is the part that matters most with this one, since that longer chamber lets you feed the beefier 3-inch .410 shotshells on top of standard .45 Colt loads. That combination is what put Bond Arms derringers on the map, and it is a big reason folks keep one around for snake country, trail carry, or just something fun and hard-hitting at the range.
The matte finish here is polished then bead-blasted, so you get an even, low-glare surface that hides handling wear better than a bright polished barrel. Front and rear sights are milled directly into the barrel, and the spring-loaded extractor comes preinstalled, so there is no fitting or gunsmithing on your end. That extra half inch over the 3-inch barrel also squeezes a little more velocity out of your loads while keeping the gun pocketable.
One of the best things about the Bond Arms system is how painless the swap is. You open the action, back out the single hinge screw with a 1/8-inch Allen wrench, lift the old barrel off, set this one in place, and reinstall the screw. It takes a couple of minutes, and once you have done it once you will wonder why more guns are not built this way.
This barrel fits the original Bond Arms hand cannon frames like the Texas Defender, Snake Slayer, Ranger, Rowdy, and similar models. It does not fit the Stinger, Stinger RS, or the single-shot Cyclops line, since those use a different frame design. If you are running an original double-barrel Bond frame, you are good to go. It is a barrel only and does not include a firearm.
It fits any original Bond Arms hand cannon frame, which covers models like the Texas Defender, Snake Slayer, Ranger, and Rowdy. It will not fit the Stinger, Stinger RS, or Cyclops lines because those use a different frame. If you have a standard Bond double-barrel frame, this barrel will drop right on.
Yes. This barrel uses a 3-inch chamber, so it handles both 2.5-inch and 3-inch .410 shotshells along with standard .45 Colt cartridges. That longer chamber is the main reason people choose the 3.5-inch over the shorter 2.5-inch versions.
It is about as easy as gun work gets. You open the action, remove the single hinge screw with a 1/8-inch Allen wrench, swap the barrel, and reinstall the screw. The whole thing takes a couple of minutes, and the sights and extractor come already installed so there is no fitting required.
Yes, this is a genuine Bond Arms barrel, not an aftermarket copy, so it is machined to the tight tolerances the interchangeable system depends on. That means it lines up and locks in the way your original barrel does. Buyers consistently note that factory barrels swap in and run without any fuss.
| UPC | 855959003868 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BABL-350-45/410-M |
| Shipping Weight | 0.475 |
You must be logged in to post a review.
Reviews
There are no reviews yet.