$20.99
4 in stock
Online inventory may differ from in-store availability.
NOTICE: This item is subject to shipping times of 10-12 days due to brand shipping logistics.
Orders are processed quickly so your item gets moving as soon as possible.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The bolt roller is one of those small parts that punches way above its size on an M1A. It sits on the roller stud at the front of the bolt and rides against the cam surface on the operating rod, and that rolling contact is what lets the bolt unlock and cycle smoothly instead of grinding metal on metal. This is a genuine Springfield Armory part (MPN MA0402) built for the M1A and M14 pattern rifles chambered in .308 Winchester / 7.62x51mm.
Rollers take a beating over thousands of rounds. The usual reasons folks go looking for a fresh one are flat spots, cracks, or excessive play in the roller, and sometimes it's a retaining clip that finally gave up and let the roller pop off during cleaning or a range session. If yours has developed side-to-side slop or you found it loose in the bottom of the action, it's time. Running a worn roller just accelerates wear on the op-rod cam, which is a much pricier part to replace down the road.
Heads up on this one: the roller is held in place by a C-clip that seats in the groove on the bolt stud. Getting it on cleanly is a lot easier with a proper bolt roller clip tool, which compresses the clip so you can slip the roller over the stud. Plenty of people have managed it with needle-nose pliers or forceps and a good bit of patience, but the right tool saves you the aggravation. Because this part sits at the heart of how the action locks and unlocks, it's smart to have a qualified gunsmith handle the swap and check that the roller spins freely once it's seated.
A dab of grease on the roller during reassembly goes a long way toward keeping things smooth. Keep it clean, keep it greased, and this part will do its quiet job for a long time.
Common signs are a flat spot on the roller, visible cracks, or noticeable side-to-side play. If the roller has come loose or fallen off during cleaning, the retaining clip has usually worn out and both the roller and clip should be freshened up. Running a worn roller wears the op-rod cam faster, so it's worth catching early.
The roller is retained by a C-clip that seats in the groove on the bolt stud, and a dedicated bolt roller clip tool makes the job much easier by compressing that clip. Some folks get it done with needle-nose pliers or forceps and patience, but the proper tool takes a lot of the fight out of it. Because this part is central to how the action cycles, having a gunsmith fit it is a good call.
Yes. This is a genuine Springfield Armory part built for the M1A and M14 pattern rifles, which share the same bolt design. It's made for the .308 Winchester / 7.62x51mm platform.
It's a smart move. Nine times out of ten a loose or lost roller traces back to a tired retaining clip, so installing a fresh clip along with the new roller helps make sure the fix actually holds. A little grease on the roller during reassembly keeps everything cycling smooth.
| UPC | 706397852863 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MA0402 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.