$39.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Running a compensator on your Strike Modular Chassis exposes your support-hand thumb to a nasty combination of hot gas and concussion, and that is exactly the problem this blast shield solves. It bolts into the front of your SMC and puts a solid wall of aluminum between your thumb and the muzzle, so you can stay locked into a high, aggressive grip without paying for it every time you touch off a round.
The shield redirects muzzle blast forward and upward, steering it away from your face and hand instead of letting it wash back over your grip. That translates to a more comfortable shooting session and cleaner sight recovery between shots. It is built for 1913 Picatinny rails and machined from 6061-T6 aluminum, which pulls heat away and sheds it faster than steel would during a long string of fire.
This is the Standard version, giving you added Picatinny rail length up front for mounting accessories. Beyond the Strike Modular Chassis itself, it will clamp onto most pistol frames with a 1913 rail and a maximum width of about 0.84 inches, so it is not strictly a one-gun part. Worth knowing before you order: this Standard shield does not have the room to run the SMC Spare Magazine Holder alongside a full-size weapon light. A compact light like an Olight Baldr Mini and similar low-profile units can work with the mag holder, but if you want a full-size light in that setup you will want the Hyper version instead.
Installation is straightforward and Strike includes the hardware you need, including a set screw, nut, and the T27 Torx tool to snug it down. At right around 2.6 ounces it barely changes the balance of your pistol. If you are running a compensator, stick with vertical-port designs rather than lateral-port comps for the cleanest results with this shield.
It puts a machined aluminum barrier between your support-hand thumb and the muzzle, guarding it from blast and heat when running a comp. The shield also redirects gases forward and up, away from your face, which makes long range sessions more comfortable and helps with faster sight recovery.
Yes. Along with the SMC ALPHA and BRAVO, it will mount to most pistol frames that have a 1913 Picatinny rail and a maximum frame width of about 0.84 inches. It is designed around the SMC but is not limited to it.
Not together. The Standard shield does not have the rail room to run the SMC Spare Magazine Holder alongside a full-size light. A compact light like an Olight Baldr Mini can work with the mag holder, but for a full-size light in that combo you will want the Hyper blast shield instead.
Installation is simple and everything you need comes in the box, including a set screw, nut, and a T27 Torx tool. At roughly 2.6 ounces it adds almost nothing to the feel of your pistol. If you are pairing it with a compensator, go with vertical-port designs for best results.
| UPC | 793811766141 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SI-SMC-BS-S |
You must be logged in to post a review.
Reviews
There are no reviews yet.