$1,711.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most AR-15s make you reach back over the receiver to charge the rifle. The Bilson Arms BA-15FC moves that job up front. Its patented forward charging handle sits on the handguard where your support hand already lives, so you can chamber a round or clear a stoppage without lifting your head off the stock or shifting your grip. During normal firing the handle stays put since it is non-reciprocating, and because the design seals off the rear of the receiver, you also cut down on the gas blowback that traditional rear charging setups can push toward your face, which is a real perk if you ever run a suppressor.
Every BA-15FC is machined in-house at Bilson's facility in Broussard, Louisiana, from billet aluminum, and the upper and lower mate up with essentially zero play. That rigid fit is a big part of why Bilson puts a 1 MOA accuracy guarantee on this rifle. The 16 inch barrel is cut from 4150/4151 CrMoV steel with a 1:7 twist, which stabilizes everything from lightweight varmint loads to heavy 77 grain match bullets, and the threaded muzzle wears a classic A2 birdcage. Chambered for .223 Rem and 5.56 NATO, it feeds happily on the most common and affordable centerfire rifle ammo out there.
The free-floating handguard gives you M-LOK slots along the sides and bottom plus a full-length Picatinny rail up top, so lights, bipods, optics, and sling mounts all have a home without touching the barrel. B5 Systems handles the furniture with a Bravo stock and matching pistol grip, comfortable and proven pieces you would normally see as upgrades. This particular model ships with a 20 round magazine for a 20+1 capacity and wears Bilson's Cerakote finish in a sharp sniper green and gray combination. Between the forward charging system, the billet construction, and all American-made components down to the pins and springs, this is an AR that stands out at the range for reasons beyond looks.
Instead of a traditional rear charging handle, the BA-15FC uses a patented charging handle mounted on the handguard. You pull it back with your support hand to chamber a round or clear a malfunction, all without breaking your cheek weld or shifting your firing grip. It is non-reciprocating, so it stays stationary while the rifle cycles.
It is a strong candidate. Because the forward charging design seals off the rear of the receiver, it reduces the gas blowback that typically hits your face when running a suppressor on a standard AR. The 16 inch barrel also comes threaded with an A2 birdcage installed, so swapping to a suppressor mount is straightforward.
The 1:7 twist is on the faster side for 5.56, which means it excels with heavier bullets in the 62 to 77 grain range while still shooting common 55 grain loads well. Since the chamber accepts both .223 Rem and 5.56 NATO, you can feed it just about any factory load. Bilson backs the rifle with a 1 MOA accuracy guarantee, so quality match ammo will show you what it can really do.
Bilson Arms builds the BA-15FC entirely in-house at their facility in Broussard, Louisiana. The company uses 100 percent American-made parts and materials, right down to the pins and springs, and machines the billet aluminum receivers themselves for a tight upper-to-lower fit.
| UPC | 850043186441 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARFCS4920R1 |
| Action | |
| Barrel Length | 16" |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Capacity | 20 + 1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.