$593.99
12 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Bersa jumped into the suppressor game with its B-Series lineup, and the B556 is the workhorse rifle can of the bunch. This is a full-auto rated 5.56 suppressor built entirely from Inconel 718 and 17-4 stainless steel, two materials that shrug off the heat and pressure that come with hard range days and high round counts. A High Temperature Cerakote finish keeps the outside looking good even after the can has been glowing hot more than a few times.
Here's where the B556 separates itself from a lot of dedicated 5.56 suppressors. The oversized baffles and serviceable front end cap are rated to 6mm, which opens the door to 5.56 NATO, .223 Rem, 6mm ARC, .243 Win, 6mm PRC, and 6mm Creedmoor all through one suppressor. If you run an AR for plinking and a 6mm bolt gun for longer shots, this single can covers both without breaking a sweat. Bersa rates it at 32 dB of sound reduction, which puts it right in the mix with well-established rifle suppressors.
The B556 ships with a 1/2×28 direct thread mount, so it goes straight onto a standard AR-15 muzzle out of the box. It's also compatible with the industry-standard 1.375×24 HUB pattern, meaning you can swap to your favorite QD mount or muzzle device system down the road without being locked into one ecosystem. The removable front end cap makes cleanup straightforward and can be replaced on its own if it ever takes damage, no need to send the whole suppressor back.
At 5.83 inches long and 15.2 ounces, the B556 keeps a sensible footprint on the end of a carbine while still bringing serious durability to the table. Add in Bersa USA's Limited Lifetime Warranty and you've got a hard-use rifle can that's built to be the last 5.56 suppressor you need to buy for a long while.
The B556 is rated for 5.56 NATO and .223 Rem, plus 6mm ARC, .243 Win, 6mm PRC, and 6mm Creedmoor thanks to its 6mm-rated end cap and oversized baffles. That makes it a solid single-can solution if you run both an AR and a 6mm hunting or precision rifle. Just make sure your host barrel has the right thread pitch or an appropriate HUB mount.
Yes. The B556 is built from Inconel 718 and 17-4 stainless steel, the same class of materials used in hard-use duty suppressors, and Bersa rates it for full-auto fire. The High Temperature Cerakote finish is designed to hold up under sustained heat as well.
It ships with a 1/2×28 direct thread mount, but the rear of the can uses the industry-standard 1.375×24 HUB pattern. That means you can swap in a wide range of aftermarket QD mounts, ratchet mounts, or other thread adapters from HUB-compatible makers whenever you want.
The front end cap is removable, which makes routine maintenance easier than on fully sealed rifle cans. If the end cap ever gets damaged, it can be replaced on its own without sending the entire suppressor back to Bersa. The whole unit is also backed by Bersa USA's Limited Lifetime Warranty for extra peace of mind.
| UPC | 850088652031 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS-10003 |
| Caliber/Gauge | 5.56/223 |
| Shipping Weight | 0.0 |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.