Description
Berry's has been turning out plated bullets from their St. George, Utah shop since 1961, and these .32 ACP round nose projectiles are a textbook example of why handloaders keep coming back. Each one starts as a swaged lead core that gets electroplated with copper to its final weight, so there's no exposed lead to deal with. After plating, every bullet gets re-struck in a die to hold a true .312 diameter, which is where that consistent feeding and steady accuracy comes from.
What Makes the Berry's .32 ACP 71 gr Round Nose Tick
This is a 71 grain round nose, the standard weight for the caliber and the same profile as most factory .32 ACP loads. That matters more than it sounds. When your handload mirrors the shape and weight your pistol already runs, it tends to feed the way the gun expects, which is exactly what you want out of a little pocket pistol or a classic like a Beretta 81 or Walther PP. The copper plating also shoots cleaner than bare cast lead and runs easier on the wallet than full jacketed bullets, which is a nice middle ground for high-volume practice.
Loading the Berry's Superior Plated .32 Bullets
Berry's doesn't publish its own load data, but cast or jacketed data for a 71 grain bullet of the same profile works fine as long as you stay under the 1,250 fps max velocity rating. Push past that and you risk core separation and accuracy issues, so stop at the max load in your manual. The other thing to watch is crimp. These plated bullets like a light taper or roll crimp, just enough to hold the bullet without cutting the plating. Bell the case mouth a touch so the bullet seats without shaving copper, and you'll get clean, consistent rounds.
.32 ACP brass runs a bit finicky between brands, so sorting your cases by headstamp goes a long way with these tiny cartridges. Do that, keep your crimp gentle, and these bullets reward you with dependable range performance round after round.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Caliber: .32 ACP
- Bullet Diameter: .312"
- Bullet Weight: 71 Grain
- Bullet Profile: Round Nose (RN)
- Construction: Copper Plated Swaged Lead Core
- Max Velocity: 1,250 fps
- Bullet O.A.L.: .423"
- Product Line: Superior Plated
- Manufacturer Part Number: 75556
- UPC: 711148755560
What’s Included
- Berry's Superior Plated .32 ACP .312" 71 gr round nose bullets (projectiles only, unprimed and unloaded)
Frequently Asked Questions
What load data should I use for Berry's .32 ACP 71 gr plated bullets?
Berry's doesn't publish its own load data, but you can use published cast or jacketed data for a 71 grain bullet of the same profile. The key is keeping your velocity under the 1,250 fps max rating for these plated bullets. Always start low and work up carefully using a trusted reloading manual.
Can I use a taper or roll crimp on these plated bullets?
Either one works. The important part is keeping it light, just enough pressure to hold the bullet in place without denting or cutting the copper plating. Over-crimping can slice through the plate and expose the lead core, which leads to fouling and accuracy problems.
Why are these bullets sized at .312 instead of .311?
Berry's sizes this bullet at a true .312 diameter, which is about a thousandth over the standard .32 ACP FMJ bore size. Because the core is soft lead under the copper plate, it doesn't spike pressure the way an oversized jacketed bullet would. That slightly larger diameter helps with a good gas seal and consistent feeding.
Are these a good choice for a .32 ACP pocket pistol?
They are. The 71 grain round nose matches the profile of common factory .32 ACP ammo, so your handloads tend to feed the way your pistol already likes. They shoot cleaner than bare lead and cost less than jacketed, making them a solid pick for range practice and plinking.





Reviews
There are no reviews yet.