Description
Berry's 100 grain HBRN plated bullets are a favorite among 9mm and .380 handloaders who want to shoot a lot without burning through their component budget. HBRN stands for Hollow Base Round Nose, and these projectiles measure .356" in diameter. Each bullet starts life as a swaged lead core that gets electroplated in copper to its final weight, then re-struck to tighten up the dimensions and weight. The result is a fully copper-encased projectile with no exposed lead, which means cleaner shooting and far less fouling than bare cast lead.
What the Hollow Base Does on Berry's 100 gr HBRN
The hollow base is the clever part. Because the rear is hollowed out, Berry's can stretch the bullet profile longer while keeping the weight at 100 grains. That longer bearing surface rides the rifling for more contact, which helps stabilize the bullet and tighten up groups. You get the feel and seating depth of a longer bullet with the lighter weight, which a lot of folks like for soft-recoiling plinking loads.
Loading the Berry's .356" 100 Grain Plated Bullets
These load up easy. You can use any published load data for a jacketed or lead cast bullet of the same weight and profile, just keep velocities in check since plated bullets run best below the max velocity rating of 1250 fps. A taper or roll crimp both work depending on your setup, but go light on the crimp. Over-crimping can cut into the plating and cause separation, which shows up as copper fouling and flyers down range. Start low, work up, and watch your overall length.
Who Reaches for Berry's 100 gr HBRN
This is a range and practice bullet first and foremost. It's indoor-range friendly thanks to the full copper plating, and it feeds the pistol caliber crowd running .356" bores. Plenty of reloaders bounce between 9mm and .380 with this same projectile, which makes it a handy one to keep stocked on the bench.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Caliber / Diameter: 9mm (.356")
- Bullet Weight: 100 Grain
- Bullet Profile: HBRN (Hollow Base Round Nose)
- Construction: Copper Plated, Swaged and Re-Struck
- Quantity: 250 Count
- Max Velocity: 1250 fps
- Bullet Overall Length: .522"
- SAAMI Max COL: 1.169"
- Manufacturer Part Number: 79585
- UPC: 711148795856
What’s Included
- 250 Berry's 9mm .356" 100 gr HBRN plated handgun bullets
Frequently Asked Questions
What does HBRN mean on these Berry's bullets?
HBRN stands for Hollow Base Round Nose. The base of the bullet is hollowed out, which lets Berry's make the profile longer while keeping the weight at 100 grains. That extra length gives more bearing surface on the rifling to help stabilize the bullet and improve accuracy.
What load data should I use for the Berry's 100 gr HBRN?
You can use any published load data for a jacketed or lead cast bullet of the same 100 grain weight and profile. Just keep your velocity under the 1250 fps rating since plated bullets aren't built for full magnum-level speeds. Always start at the starting charge and work up while watching your overall length.
Will these .356" bullets work for both 9mm and .380?
The .356" diameter makes this a popular choice for reloaders who load both 9mm and .380 ACP on the same bench. Load data differs between the two cartridges, so reference the correct published data for whichever caliber you're building. Many handloaders keep these stocked specifically because they bridge both calibers.
Do I need to worry about crimping these plated bullets?
Yes, go easy on the crimp. A light taper or roll crimp works depending on your dies, but over-crimping can cut through the copper plating and cause the core to separate. That leads to extra copper fouling and accuracy problems, so dial your crimp back and just remove the case flare.




Reviews
There are no reviews yet.