Description
Berry's Superior Plated Handgun Bullets are a go-to projectile for anyone loading up a steady supply of .40 S&W or 10mm range ammo. These are .401 diameter, 165 grain bullets with a Hollow Base Flat Point profile and Berry's thicker plating, which is what lets them handle higher velocities than a standard plated bullet. If you've shot plated before and liked the clean barrels but wished you could push them a little harder, this is the one to grab.
How Berry's Builds These Plated Bullets
It starts with a swaged lead core for uniform weight. From there the core gets fully electroplated in pure copper to its final weight, which leaves no exposed lead anywhere on the bullet. The plated bullet is then re-struck in a die to bring it back to precise, consistent dimensions. That last step is what gives you the solid core-to-plating bond and the shot-to-shot consistency that makes these worth loading. The complete copper encapsulation also cuts way down on airborne lead, which is a real plus if you spend time at an indoor range.
Loading the 165 gr HBFP-TP for .40 S&W and 10mm
The flat point feeds reliably through most semi-auto designs and punches clean, easy-to-score holes in paper. These bullets run a touch longer than a typical .40 or 10mm projectile, but Berry's notes that standard 165 grain load data works fine. Suggested cartridge overall length is 1.125 inches for .40 S&W and 1.250 inches for 10mm. You can use either a taper or roll crimp, and cast or jacketed data at the same weight and profile will get you started. The thick plating supports velocities up to 1500 fps, so there's room to tune loads for either cartridge.
Why Reloaders Keep These on the Bench
Plated bullets like these give you performance in the neighborhood of full metal jacket without the mess of bare lead, and they tend to cost less than jacketed per round. For high-volume practice, steel plate work, or just keeping your ammo can full, Berry's has a long reputation for turning out accurate, clean-shooting bullets that do exactly what you need at the range.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Manufacturer Part Number: 01500
- UPC: 711148015008
- Caliber: .40 S&W / 10mm
- Bullet Diameter: .401"
- Bullet Weight: 165 Grain
- Bullet Profile: Hollow Base Flat Point – Thick Plate (HBFP-TP)
- Construction: Electroplated copper over swaged lead core
- Bullet O.A.L.: 0.595"
- Suggested Cartridge O.A.L. (.40 S&W): 1.125"
- Suggested Cartridge O.A.L. (10mm): 1.250"
- Max Velocity: 1500 fps
- Crimp: Taper or roll
What’s Included
- 1000 Berry's Superior Plated .40 S&W/10mm 165 gr Hollow Base Flat Point Thick Plate bullets
Frequently Asked Questions
What load data should I use for these Berry's 165 gr plated bullets?
Berry's notes that any standard 165 grain .40 S&W or 10mm load data will work with these. Cast or jacketed data at the same grain weight and profile is a good starting point, and you can find usable data in most loading manuals or on powder manufacturer websites. These bullets run slightly longer than a typical .40 or 10mm projectile, so work up carefully and confirm your overall length.
Can these plated bullets handle 10mm velocities?
Yes. The thick plating on these Superior Plated bullets supports velocities up to 1500 fps, which is why they hold up to both .40 S&W and 10mm loads. That extra plating is the main difference from a standard plated bullet and gives you more room to push them.
Are Berry's plated bullets okay for indoor range use?
They're a solid pick for it. Because the lead core is fully encased in copper plating with no exposed lead, there's far less airborne lead when you shoot, which matters at indoor ranges. The plating also keeps lead fouling out of your barrel compared to bare cast bullets.
Do I use a taper crimp or a roll crimp on these?
Either one works with these plated bullets. Most folks running .40 S&W and 10mm in semi-autos go with a light taper crimp to protect the plating and keep headspacing right. Just avoid crimping too aggressively, since over-crimping can cut into the copper plating on any plated bullet.




Reviews
There are no reviews yet.