Description
If you load 9mm in any kind of volume, Berry's 124gr Round Nose is the workhorse projectile a lot of reloaders keep coming back to. It sits right in the sweet spot of the 9mm weight range, giving you a nice balance of velocity and manageable recoil that works well for target practice, action shooting, and plinking. The round nose profile feeds slick in most semi-auto pistols, and the .356 diameter is spot on for standard 9mm bores.
What sets Berry's apart is the plating process. Each bullet begins as a swaged lead core that gets electroplated with copper to its final weight, then re-struck in a die for uniform dimensions and consistent weight. That full copper encapsulation means no exposed lead, so these run cleaner than bare cast bullets and are friendly to indoor ranges where airborne lead is a concern. You also get far less barrel leading than you'd see with traditional lead, which means less time scrubbing and more time shooting.
Loading the Berry's 124gr Round Nose
These plated bullets are easy to work with on the bench. You can use cast or jacketed load data with the same weight and profile, and either a taper or roll crimp will do the job. The big thing to keep in mind is to go easy on the crimp. Over-crimping can separate the plating from the core, which leads to copper fouling and accuracy problems. Berry's lists a max velocity of 1250 fps for this bullet, with a suggested bullet overall length of .585 inches and a cartridge overall length of 1.160 inches as a solid starting point.
Why Reloaders Reach for Berry's Superior Plated
Berry's has been plating bullets since 1961, and the consistency shows up on paper. The uniform plating and tight weight control translate to repeatable groups load after load, and the cost per round comes in well under comparable jacketed projectiles. For building bulk practice ammo without giving up quality, this 124gr round nose is tough to beat.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Manufacturer Part Number: 10059
- UPC: 711148100599
- Caliber: 9mm (.356)
- Bullet Weight: 124 Grain
- Bullet Diameter: .356"
- Bullet Type: Round Nose (Plated)
- Construction: Swaged Lead Core, Copper Plated
- Bullet OAL: .585"
- Suggested Cartridge OAL: 1.160"
- Max Velocity: 1250 fps
- Quantity: 500 Count
What’s Included
- 500 Berry's 124gr 9mm round nose plated bullets (projectiles only, not loaded ammunition)
Frequently Asked Questions
Are the Berry's 124gr 9mm bullets loaded ammunition?
No, these are component bullets, meaning projectiles only. They're meant for handloaders to seat into their own 9mm brass with the appropriate primer and powder. You'll need the rest of your components and a press to turn these into finished rounds.
What load data should I use for the Berry's 124gr round nose?
You can use published cast or jacketed load data for a 124gr bullet with the same profile, which is available in most manuals or on powder manufacturer websites. Berry's lists a max velocity of 1250 fps for this bullet, so stay at or below that to avoid separating the plating from the core. As always, start low and work your load up while watching for pressure signs.
Do these plated bullets work for indoor range use?
Yes, the copper fully encapsulates the lead core with no exposed lead at the base or tip. That cuts down on airborne lead when the round fires, which makes them a popular pick for indoor ranges. They also leave far less lead fouling in your barrel than bare cast bullets.
Should I use a taper crimp or roll crimp with the Berry's 124gr RN?
Either one works with these plated bullets. The key is to avoid over-crimping, since too much crimp can break the plating away from the lead core and cause copper fouling and accuracy issues. A light, consistent crimp that holds the bullet securely is all you need.




Reviews
There are no reviews yet.