Description
Berry's put these 200-grain spire points together for folks who want to feed their .300 Blackout without burning through their wallet. Each one starts as a swaged lead core that gets electroplated with copper, then re-struck to final shape. That second strike tightens up the dimensions and locks the plating to the core, which is what gives you the round-to-round consistency that matters once you're seated at the bench chasing a tight group.
At .308 diameter and 200 grains, these land in the heavier end of the Blackout range, which makes them a natural fit for subsonic work. Load them down with a powder like H110 or Lil'Gun, run them through a can, and you've got quiet, repeatable range ammo that won't lead up your barrel the way bare cast bullets can. The copper plating also cuts down on airborne lead when you touch one off, so your indoor sessions stay a little cleaner too.
What Sets the Berry's 200gr Spire Point Apart
Berry's keeps the max velocity at 1,400 fps for a 1:7 twist barrel and 1,100 fps for a 1:5 twist, and these aren't meant for anything faster than a 1:7 twist. Stay inside those numbers and you avoid core and jacket separation while holding onto accuracy. Because they're plated and not a true jacketed bullet, you can work up loads using published data for a jacketed spire point of the same weight. Plenty of handloaders run these in 8, 9, 10, and 16 inch barrels across AR-15 and bolt builds with groups hovering right around an inch to an inch and a half at 100 yards.
Putting the .300 Blackout Spire Point to Work
These are target and plinking projectiles first and foremost. They're the kind of bullet you buy by the box to log trigger time, develop a quiet suppressed load, or just keep a steady supply of range ammo on the shelf. They are not expanding hunting bullets, so keep them pointed at paper and steel and they'll earn their keep. Each box holds 200 ready-to-load bullets, no brass, powder, or primers included.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Caliber: .300 AAC Blackout
- Bullet Diameter: .308"
- Bullet Weight: 200 Grain
- Bullet Type: Plated Spire Point (TMJ-SP)
- Construction: Copper electroplated, re-struck lead core
- Cannelure: No
- Max Velocity (1:7 Twist): 1,400 fps
- Max Velocity (1:5 Twist): 1,100 fps
- Quantity: 200 Per Box
- Manufacturer Part Number: 02197
- UPC: 711148021979
- Country of Origin: United States
What’s Included
- 200 Berry's Superior .300 AAC Blackout 200gr Spire Point plated bullets
Frequently Asked Questions
Are these Berry's 200gr Spire Point bullets good for subsonic .300 Blackout loads?
Yes, the 200-grain weight makes them a solid pick for subsonic work. Pair them with a common Blackout powder like H110 or Lil'Gun and run them through a suppressor for quiet, consistent range ammo. They're a favorite for suppressed target and plinking loads in short-barreled builds.
What twist rate do these bullets need?
Berry's lists a max velocity of 1,400 fps in a 1:7 twist barrel and 1,100 fps in a 1:5 twist. They are not recommended for barrels faster than a 1:7 twist. Most standard .300 Blackout barrels in the 1:7 to 1:8 range will stabilize them just fine.
Can I use jacketed load data with these plated bullets?
You can. Since these are plated and re-struck to precise dimensions, you can work up loads using published jacketed data for a 200-grain spire point. Just stay under Berry's listed max velocity to keep the plating bonded to the core and your groups tight.
Are these expanding bullets for hunting?
No, these are plated target and plinking projectiles, not controlled-expansion hunting bullets. They shine on paper and steel and for building economical practice ammo. If you need terminal expansion on game, you'll want a dedicated hunting projectile instead.



Reviews
There are no reviews yet.