$69.99
13 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Berger Hybrid Target 7mm (.284) 180 grain HPBT is a match-grade projectile built for people who care about where every round lands at distance. The headliner here is Berger's hybrid ogive, which blends a tangent shape near the bearing surface with a secant profile up front. The tangent start helps the bullet align itself as it engages the rifling and keeps it forgiving when you're dialing in seating depth, while the secant nose cuts drag and keeps wind drift in check. That combination is why this design earned a reputation as a favorite among top long-range competitors.
The numbers back up the design. This bullet carries a G1 BC of 0.680 and a G7 BC of 0.349, with a sectional density of 0.319 and a form factor of 0.915. It measures 0.284 in diameter with an overall length of 1.527 inches and a boat tail base that helps it hold velocity downrange. For stabilization, you'll want a 1:9 inch twist or faster to get the most out of it.
Every one of these is made with a J4 Target Jacket, the same precision jacket that custom bullet makers reach for. Berger's core manufacturing holds tight tolerances, which means you can skip the weight-sorting step that a lot of reloaders do with other bullets. That consistency translates to more predictable drop, a steady BC, and groups that stay honest shot after shot.
This is a reloading component, so these are projectiles only and not loaded ammunition. They're a proven pick for 7mm chamberings like the 7mm PRC, 284 Winchester, 7mm Rem Mag, and similar cartridges where handloaders are chasing precision at long range. If you're building match loads or stretching things out past the point where lesser bullets start getting pushed around by the wind, these earn their spot on the bench.
Berger lists a minimum twist of 1:9 inches or faster for proper stabilization. A 1:8 or 1:8.5 twist works great too and is common on dedicated long-range 7mm barrels. Running too slow a twist can keep the bullet from fully stabilizing, so stick with 1:9 or faster for best accuracy.
These are reloading components, meaning projectiles only. You'll need your own brass, powder, and primers to build a complete round. They're intended for handloaders assembling their own precision 7mm loads.
The hybrid ogive blends a tangent shape at the bearing surface with a secant shape toward the tip. The tangent portion makes the bullet far more forgiving on seating depth than a pure VLD, while the secant nose keeps the high BC and low wind drift. In short, you get VLD-like ballistics that are much easier to tune.
This bullet is a strong match for 7mm chamberings like the 7mm PRC, 284 Winchester, 7mm Rem Mag, and other 7mm wildcats built for distance. With a G1 BC of 0.680, it's a popular choice for long-range target and competition shooting. Just make sure your barrel's twist is 1:9 or faster.
| UPC | 679459284073 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 28407 |
| Bullet Caliber | 7mm |
| Caliber/Gauge | 284 Caliber |
| Grains | 180 |
| Quantity | 100 Per Box |
| Shipping Weight | 2.6813 |
You must be logged in to post a review.
Reviews
There are no reviews yet.