Berger 6mm 68gr Flat Base Target Bullets .243 100/Box – 24411

Description

Berger's 6mm 68 grain Flat Base Target bullet has earned its reputation among benchrest crowds for one reason: it stacks rounds into one ragged hole when you do your part. These are .243 diameter projectiles weighing 68 grains, built to match-grade standards with a tangent ogive profile that's known for being easy to load, tune, and shoot. The flat base design adds to the inherent stability of the bullet, which is a big part of why these print such consistent groups at short and mid-range distances.

What Sets the 6mm 68gr FB Target Apart

The heart of this bullet is the J4 Precision target jacket. These jackets are held to a Total Indicated Runout of plus or minus .0001, with manufacturing tolerances tight enough that every bullet in the box pulls its weight. That jacket uniformity translates directly to downrange consistency, which is exactly what you want when a tenth of an inch decides a match. With a G1 BC listed around 0.255 and a sectional density of 0.165, this projectile is dialed in for the 300 yards and under game where a boat tail isn't needed.

Loading the Berger 68gr Flat Base .243

These like a 1:13 inch twist or faster to stabilize properly, so check your barrel before you start working up a load. The overall length runs 0.833 inches with a base to ogive measurement of 0.402 inches, handy numbers to have when you're setting seating depth. Because of the tangent ogive, these bullets tend to be less picky about seating depth than VLD designs, which makes finding an accurate node a bit less of a chase for folks newer to load development.

If you're building loads for a 6mm benchrest rig, a .243 Win, or a wildcat chasing varmints and paper, this 68 grainer is a proven performer that rewards careful reloading with real accuracy.