0
0

Bergara BTi-30 .30 Cal Titanium Suppressor FDE 5/8×24 HUB Mount

UPC: 043125930036

$1,022.99

16 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Bergara built its reputation on barrels that flat out shoot, so when they finally got into the suppressor game, precision was the whole point. The BTi-30 is a .30 caliber can 3D printed from Grade 5 titanium, coming in at 12.9 ounces and 6.5 inches long with a 1.75 inch diameter. That is light enough to live on a mountain rifle without wrecking the balance, yet it carries a rating all the way up to .300 Remington Ultra Mag on a 16 inch barrel. Bergara engineered it to minimize point of impact shift and claims it can tighten groups up to 25 percent compared to traditional cans or a bare muzzle, which tells you exactly who this was built for.

Two End Caps, Two Personalities on the BTi-30

The trick up this can's sleeve is the interchangeable end cap system. Run the vented cap and you bleed off peak pressure in the blast chamber, which means less blowback, quicker recovery between shots, and better accuracy. Swap to the sealed cap with a simple 5/8 socket and you get maximum sound reduction for hunting or quiet range days. The helical fluted exterior is not just for looks either. It sheds heat faster during longer strings, and the whole body wears a durable C-Series Cerakote finish in Flat Dark Earth that holds up to hard field use and is safe for ultrasonic cleaning.

Mounting the Bergara BTi-30 Your Way

Bergara went with the industry standard 1.375×24 HUB interface, so you are never locked into a proprietary system. It ships with a 5/8×24 direct thread mount that indexes off the muzzle crown rather than the shoulder, which takes alignment guesswork out of the equation. Prefer a taper mount or quick detach setup from another maker? Swap it in and go. For hunters and long range folks who want a light, accurate, adaptable .30 cal can from a company that knows precision rifles inside and out, the BTi-30 makes a strong first impression.

Key Specifications

  • Model: BTi-30
  • Manufacturer Part Number: BTi-30FDE
  • UPC: 043125930036
  • Caliber: .30 Caliber (rated .22 LR to .300 RUM, 16" barrel)
  • Material: Grade 5 Titanium (3D printed), stainless steel mount and end caps
  • Weight: 12.9 oz
  • Length: 6.5 inches
  • Diameter: 1.75 inches
  • Mount: 1.375×24 HUB compatible, 5/8×24 direct thread mount included
  • End Caps: Interchangeable vented and sealed caps included
  • Finish: C-Series Cerakote, Flat Dark Earth
  • Warranty: Bergara Limited Lifetime Warranty

What’s Included

  • Bergara BTi-30 suppressor
  • 5/8×24 TPI stainless HUB compatible direct thread mount
  • Vented stainless end cap
  • Non-vented (sealed) stainless end cap
  • Instruction and safety manual

Frequently Asked Questions

What calibers can the Bergara BTi-30 handle?

The BTi-30 is rated from .22 LR all the way up to .300 Remington Ultra Mag on a 16 inch or longer barrel. That covers pretty much any bolt gun cartridge you would take hunting or shoot at distance, including 6.5 Creedmoor, .308 Win, and .300 Win Mag. One can, a whole safe worth of rifles.

What is the difference between the vented and sealed end caps?

The vented cap reduces peak pressure in the blast chamber, which cuts blowback, speeds up recovery between shots, and helps accuracy. The sealed cap gives you maximum sound suppression when quiet is the priority. Swapping between them takes seconds with a standard 5/8 socket.

Will the BTi-30 work with mounts from other suppressor brands?

Yes. The BTi-30 uses the industry standard 1.375×24 HUB interface, so it accepts a wide range of direct thread, taper, and quick detach mounts from other manufacturers. It ships with Bergara's own 5/8×24 direct thread mount that indexes off the muzzle crown for reliable alignment.

Is the Bergara BTi-30 easy to clean?

It is. The C-Series Cerakote finish is rated safe for ultrasonic cleaners, which makes maintenance simple. The mount and end caps are also removable, so you can pull them off for a more thorough cleaning when needed.

Additional information

UPC

043125930036

Manufacturer

Manufacturer Part Number

BTi-30FDE

Caliber/Gauge

.30 Caliber

Color

Flat Dark Earth

Model

Product Type

Suppressor

Shipping Weight

1.9

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Bergara BTi-30 .30 Cal Titanium Suppressor FDE 5/8×24 HUB Mount”

Related Products