0
0

Bergara Cima Pro Ti .300 PRC 22in Carbon Fiber Bolt Action Rifle

UPC: 043125000982

$2,999.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Packing .300 PRC performance into a rifle light enough for real mountain hunting is no small trick, and the Cima Pro is Bergara's answer. This is the top rung of their lightweight lineup, sitting in the Premier series above the Cima CF, and just about every part of it was reworked to shave ounces without giving up the accuracy Bergara built its name on. The heart of the rifle is an autoclave-cured carbon fiber stock, a process that squeezes out excess resin for the best possible fiber-to-resin ratio. The result is a stock that is remarkably light and stiff, shrugs off weather and rough handling, and soaks up recoil better than you'd expect from a rifle this trim.

A Premier Action Built for the Cima Pro

Up top you get Bergara's Premier action machined from 416 stainless steel, then skeletonized with lightening cuts and given a widened ejection port for smooth, positive cycling with long magnum cases. The spiral-fluted bolt runs slick, the two-position safety is simple and sure, and the whole works wears a titanium-tone Cerakote finish that handles moisture and grime out in the field. The receiver is drilled and tapped for Remington 700 pattern bases with 8×40 screws, so mounting glass is dead easy, and the fully adjustable TriggerTech trigger breaks clean right out of the box.

CURE Carbon Barrel Meets .300 PRC

The 22 inch CURE carbon fiber barrel is where Bergara separates itself from the pack. Their patent-pending carbon weave uses embedded stainless strands to pull heat away from the bore, addressing the consistency problems that have dogged carbon barrels for years. The muzzle comes threaded with Bergara's new side-port ST2 brake installed, which takes real bite out of the .300 PRC and helps you stay on target for follow-ups. Feeding runs through M5-compatible bottom metal with a hinged floorplate holding three rounds, and three QD sling studs give you flexible carry options. Backed by a sub-MOA guarantee, this is a legitimate long-range hunting rig that won't wear you out on the climb.

Key Specifications

  • Manufacturer: Bergara
  • Manufacturer Part Number: BPR38-300PRC
  • UPC: 043125000982
  • Series: Premier Series
  • Caliber: .300 PRC
  • Action: Bolt Action, Premier 416 Stainless Steel with Lightening Cuts
  • Barrel: 22" Bergara CURE Carbon Fiber, Threaded Muzzle
  • Muzzle Device: Bergara ST2 Side-Port Muzzle Brake (Installed)
  • Stock: Autoclave-Cured Carbon Fiber with Camo Finish
  • Capacity: 3 Rounds, Hinged Floorplate (M5-Compatible Bottom Metal)
  • Trigger: TriggerTech, Fully Adjustable
  • Bolt: Spiral-Fluted
  • Metal Finish: Titanium-Tone Cerakote (Sniper Gray)
  • Scope Mounting: Remington 700 Pattern Base, 8×40 Screws
  • Safety: Two-Position
  • Accuracy Guarantee: Sub-MOA

What’s Included

  • Bergara Cima Pro bolt action rifle in .300 PRC
  • ST2 side-port muzzle brake (factory installed)
  • Owner's manual

Frequently Asked Questions

How much does the Bergara Cima Pro weigh in .300 PRC?

Short-action Cima Pro rifles come in around 5.5 pounds, and magnum chamberings like this .300 PRC run right around 6 pounds unloaded. For a magnum-caliber rifle with a sub-MOA guarantee, that puts it firmly in mountain rifle territory. Between the carbon stock, carbon barrel, and skeletonized action, Bergara trimmed weight just about everywhere they could.

Does the Cima Pro use a detachable magazine?

No, this rifle feeds from a hinged floorplate with a release lever inside the trigger guard, holding 3 rounds in .300 PRC. The bottom metal is M5-compatible, which gives you aftermarket options down the road if you prefer a detachable box setup. Many backcountry hunters prefer the floorplate since there is no magazine to lose or rattle.

What scope mounts fit the Bergara Cima Pro?

The receiver is drilled and tapped for Remington 700 pattern bases using 8×40 screws, same as the rest of Bergara's Premier line. That means a huge selection of rails, rings, and one-piece mounts will bolt right up. Just make sure whatever base you pick uses the beefier 8×40 screw size rather than the older 6-48.

How does the Cima Pro differ from the Cima CF?

The Cima Pro is the step-up model in Bergara's Premier line, while the Cima CF lives in the B-14 family. The Pro gets the 416 stainless Premier action with skeletonizing cuts and an enlarged ejection port, an autoclave-cured carbon stock, a TriggerTech trigger, and the new ST2 side-port brake. Both share Bergara's CURE carbon barrel technology, but the Pro brings higher-end manufacturing throughout.

Additional information

UPC

043125000982

Manufacturer

Manufacturer Part Number

BPR38-300PRC

Action

Barrel Length

22"

Caliber/Gauge

.300 PRC

Capacity

3

Color

Sniper Gray

Model

Product Type

Rifle

Safety

Two-Position

Reviews

There are no reviews yet.

Be the first to review “Bergara Cima Pro Ti .300 PRC 22in Carbon Fiber Bolt Action Rifle”