Description
Straight-pull rifles have been a European favorite for decades, and with the BRX1, Beretta finally gave American hunters a reason to pay attention. Instead of the lift-pull-push-drop motion of a standard bolt gun, you simply pull the bolt straight back and shove it forward. Once the motion clicks, follow-up shots come noticeably quicker, and you can keep your eye in the scope while you run the action. The bolt locks up with eight rotating lugs, and Beretta put the design through NATO-style torture testing, including wet conditions, extreme cold, and a six-figure round-count endurance run, before it ever hit shelves.
What Makes the BRX1 .308 Worth a Look
The 20 inch barrel is cold hammer-forged from Beretta's Steelium alloy, with the barrel and chamber formed from a single piece for consistency shot to shot. The muzzle comes threaded 5/8×24 for a suppressor or brake, and a Picatinny rail up top means mounting glass is simple. The single-stage trigger adjusts between roughly 2.1, 2.6, and 3.3 pounds, so you can set it crisp and light for the bench or a bit heavier for cold-weather hunts with gloves. Feeding comes from a flush-fitting 5-round polymer magazine with high-visibility orange accents, which is a small touch you will appreciate the first time you drop one in the leaves.
Built for Either Shoulder
Here is where this rifle really stands apart: the whole thing is genuinely ambidextrous. The bolt handle and ejection can be swapped from right to left in about a minute, and the three-position safety rides at the rear of the bolt where either thumb can run it silently. That quiet safety is a real asset when a buck is standing 60 yards out with his ears up.
Beretta BRX1 in the Field
At 7.1 pounds bare, the BRX1 carries and balances well, and the black synthetic stock features a negative comb and soft Extralight recoil pad that keep .308 recoil pleasant. Add a scope and you have a fast-handling, sub-MOA capable hunting rig ready for deer camp.
Key Specifications
- Model: BRX1
- MPN: JBRX1E316/20
- UPC: 082442981390
- Caliber: .308 Win / 7.62 NATO
- Action: Straight-Pull Bolt Action
- Barrel Length: 20", cold hammer-forged
- Muzzle Thread: 5/8×24
- Twist Rate: 1:10
- Capacity: 5+1
- Trigger: Single-stage, adjustable 2.1 / 2.6 / 3.3 lbs
- Safety: 3-Position, bolt-mounted
- Stock: Black synthetic, negative comb
- Optics Mount: Picatinny rail (no iron sights)
- Overall Length: 41"
- Weight: 7.1 lbs unloaded
- Handedness: Fully ambidextrous, convertible
What’s Included
- Beretta BRX1 rifle
- One 5-round detachable magazine
- Owner's manual
Frequently Asked Questions
How is the BRX1 straight-pull action different from a regular bolt action?
Instead of lifting the bolt handle up, pulling back, pushing forward, and locking down, you just pull straight back and push straight forward. That cuts the motion in half and makes follow-up shots noticeably faster once you get used to it. The bolt still locks up solid with eight rotating lugs, so you are not giving up strength for speed.
Can a left-handed shooter use the Beretta BRX1?
Yes, and better than almost any rifle in its class. The bolt handle and ejection direction can be converted from right to left-hand operation in about a minute without special tools. The three-position safety sits at the rear of the bolt where either thumb can reach it naturally.
Is the BRX1 barrel threaded for a suppressor?
It is. The 20 inch cold hammer-forged barrel comes threaded 5/8×24 from the factory, which is the standard pitch for most .30 caliber suppressors and muzzle brakes. Just spin off the thread protector and you are ready to mount your can.
Can I change calibers on the BRX1 later?
That is one of the rifle's best tricks. Beretta offers conversion kits with a matched barrel and bolt head, and swaps take only a few minutes with basic tools. Since the optics rail is attached to the barrel assembly, your scope stays zeroed to that barrel through the swap.





Reviews
There are no reviews yet.