$214.95
42 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Bravo Company built the MCMR to do one thing extremely well: give you a rock-solid, lightweight mounting platform that doesn't touch the barrel. This 10-inch version free-floats the barrel to pull fore-end loads off it, which cuts down deflection and helps your rifle print tighter groups. Up top you get a full-length Picatinny rail, and around the sides and bottom sit up to eight rows of M-LOK slots, so there's no shortage of real estate for lights, lasers, bipods, hand stops, and QD sling points.
The heart of this rail is BCM's patented mounting system, the same steel barrel nut and lock-up first proven on the KMR series. It uses a mechanical index to the 12 o'clock rail and positions the mounting hardware to fight the movement that heat can cause during long strings of fire. The steel barrel nut is shared across the KMR, MCMR, and QRF lines, and it stays put when things get hot. Nice bonus for anyone who has fought with timing before: the nut doesn't need to be timed to line up your gas tube, so you torque it down and slide the rail over it.
The MCMR is precision-machined from aerospace 6061-T6 aluminum and finished in a Mil-Spec Type III hard coat anodize, so it shrugs off holster wear, weather, and hard handling. BCM's proprietary profile adds cross-sectional strength without bulking things up, and the slim outside diameter is friendly to C-clamp and thumb-over-bore grips. The inner diameter clears low-profile gas blocks and most cans, and this length pairs well with pistol-length, carbine-length, or mid-length gas systems.
Installation is refreshingly straightforward. BCM includes everything you need in the box, so you're not hunting down a separate hardware kit. Grease the receiver threads, torque the barrel nut, slip the rail over it, then lock down the index plate and mounting screws. Builders and gunsmiths consistently rate the fit and finish on these as flawless, and the lockup is famously tight and doesn't budge once it's set.
No, and that's one of the best parts about it. The BCM barrel nut torques straight down and does not need to be timed to clear the gas tube. You torque the nut, slide the rail over it, and lock it in place with the index plate and hardware.
The 10-inch MCMR is designed to run with pistol-length, carbine-length, or mid-length gas systems. You'll want to pair it with a low-profile gas block so it clears the inside of the rail. The 1.3-inch inner diameter also leaves room for most suppressors.
Yes. BCM packs in the steel barrel nut, the barrel nut wrench, all the mounting hardware, thread locker, and an M-LOK QD sling mount. Unlike some rails that make you buy a separate install kit, you get the full package here.
It can. Because the MCMR free-floats the barrel, it removes fore-end pressure and loads from the barrel, which reduces deflection and helps with consistency shot to shot. The rigid 6061-T6 build and tight BCM lockup keep everything stable even when the gun heats up.
| UPC | 812526021632 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MCMR10556BLK |
| Color | Black |
| Length | 10 |
| Model | |
| Product Type | Handguard |
| Style | M-LOK |
You must be logged in to post a review.
Reviews
There are no reviews yet.