$89.95
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The BCM Gunfighter Compensator Mod 0 comes from Bravo Company MFG, and it takes a different route than most comps on the market. Where a lot of muzzle brakes chase pure recoil reduction by dumping gas and pressure out to the sides, BCM built this one for tactical use where blowing blast and noise onto the guy next to you is a real problem. It reduces muzzle rise, tames flash, and cuts down on lateral pressure, all while staying manageable for the folks working close to you.
Inside the device you'll find tuned slots paired with an interior cone geometry. That combination handles three jobs at once: recoil mitigation, muzzle-rise compensation, and flash reduction. The trade-off BCM made was intentional. Rather than venting everything sideways, the design keeps more of the blast and noise pointed downrange, which is exactly why it earned a reputation for team and close-quarters shooting. It's a comp meant for real-world use rather than squeezing every last bit of flatness out of a bench setup.
BCM machines the Mod 0 from stainless steel and finishes it in black nitride, so it holds up well against corrosion and the brutal environment right at the muzzle. It's threaded 1/2-28 to fit standard 5.56 and .223 AR-15 barrels, and it ships with a crush washer for proper timing. Worth noting: because of the aggressive internal design, some pitting on the interior surfaces is normal over time. BCM tested these across many thousands of rounds and built in plenty of wear tolerance before you'd see any drop in performance.
The exterior is cut to mil-spec dimensions, which means it doubles as a mounting surface for flash-hider-mounted suppressors and blank firing adapters. If a can is somewhere in your plans, this comp already speaks the right language. Getting it timed correctly makes a difference, so having a qualified armorer install it is the way to go.
It's threaded 1/2-28 tpi, which is the standard thread pitch for 5.56 NATO and .223 AR-15 barrels. If your barrel has 1/2-28 threads, this comp will thread right on. It ships with a crush washer so you can time it properly during install.
Most comps vent gas hard to the sides to fight recoil, which throws a lot of blast and noise onto anyone standing near you. The Mod 0 was designed for tactical and CQB use, so it produces noticeably less side blast and noise while still handling muzzle rise, flash, and recoil. It's built for team work rather than pure flatness at the bench.
Yes. The exterior dimensions are cut to mil-spec, so it works as a mounting surface for flash-hider-mounted suppressors and blank firing adapters. That makes it a solid pick if a can is part of your setup down the road.
It is. Because of the aggressive internal design that impedes gas flow more than typical comps, BCM notes that small pits on the interior surfaces are expected and normal. The device was tested across many thousands of rounds and built with plenty of wear tolerance before any performance loss shows up.
| UPC | 855877004046 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | GFCMOD0556 |
| Caliber/Gauge | .22 Caliber |
| Color | Black |
| Length | 6.2500 |
| Model | |
| Product Type | Compensator |
| Thread Pattern | 1/2"-28 tpi |
You must be logged in to post a review.
Reviews
There are no reviews yet.