Description
The BCM Mod 2 Widebody Stock Kit takes one of the most respected replacement stocks on the market and pairs it with Bravo Company's MK2 recoil mitigation setup, so you're not just swapping a stock, you're upgrading how the whole rifle cycles. Everything is made in Hartland, WI, and it shows in the fit and finish. The Mod 2 stock uses a patented semi-clubfoot design that gives you a wider cheek weld and cleaner lines than a baseline M4 stock, and the whole profile is built to stay snag free with no sharp edges to grab a sling, antenna, or your gear when you shoulder it in a hurry.
What Sets the Mod 2 Widebody Apart
The widebody shape isn't just for looks. That extra material gives you a more solid, repeatable cheek weld, which pays off behind a red dot or LPVO when you're trying to stay on target through recoil. It holds onto BCM's internal latch system and the ambidextrous rotation-limited QD interface, plus a removable buttpad and multiple sling attachment points including the VBOST tab for running an S-folded sling in tight quarters or vehicle work.
The MK2 Buffer System Doing the Heavy Lifting
The real story here is the MK2 receiver extension. It runs about three-quarters of an inch longer than a standard carbine tube, which lets it use a full rifle-length M16A4 action spring spread over more coils along with the heavier T0 buffer at roughly 3.8 ounces. The result is a wider operating envelope, more consistent carrier velocity, and noticeably softer felt recoil, so follow-up shots come faster and the gun stays flatter. Worth knowing: the MK2 is a semi-proprietary system, so it needs the rifle spring and BCM MK2 buffer included in the kit rather than standard carbine parts.
Installing the Mod 2 Kit
Installation follows the same steps as any carbine stock swap. Pull the old stock, spring, and buffer, thread on the MK2 tube with the included castle nut and QD end plate, drop in the rifle spring and T0 buffer, and slide the Mod 2 stock onto the eight-position tube. No permanent modifications, and it works on standard AR-15 lowers as well as most AR-10 platforms.
Key Specifications
- Manufacturer: Bravo Company Mfg / BCM
- Manufacturer Part Number: BCM-GFSK-MOD2-RMS-BLK
- UPC: 812526022165
- Color: Black
- Style: Collapsible
- Product Type: Mil-Spec
- Stock Design: Mod 2 Widebody, patented semi-clubfoot (US Patent D901616)
- Receiver Extension: BCM MK2, 8-position, Mil-Spec diameter, approx. 3/4 inch longer than carbine
- Extension Material: 7075-T6 aluminum, hard coat anodized
- Action Spring: Mil-Spec M16A4 rifle length
- Buffer: BCM MK2 Mod 1 T0, approx. 3.8 oz
- End Plate: BCM EPM4 with QD swivel mount
- Sling Features: Ambidextrous QD interface, VBOST tab, additional web sling slots
- Buttpad: End-user removable modular buttpad
- Made In: Hartland, WI, USA
What’s Included
- BCM Mod 2 Widebody stock, black
- BCM MK2 receiver extension (8-position, Mil-Spec diameter, approx. 3/4 inch longer than carbine)
- Mil-Spec M16A4 rifle action spring
- BCM MK2 Mod 1 T0 buffer (approx. 3.8 oz)
- BCM EPM4 end plate with QD swivel mount
- Locking nut (castle nut) for M4
Frequently Asked Questions
Does the BCM Mod 2 Widebody Stock Kit come with everything I need to install it?
Yes, this is a complete kit. It includes the Mod 2 stock, the MK2 receiver extension, the rifle-length action spring, the T0 buffer, a QD end plate, and the castle nut. You just need basic tools like an armorer's wrench and a way to secure your lower to swap it out.
Can I run a standard carbine buffer or spring with the MK2 tube in this kit?
No. The MK2 is a semi-proprietary system that requires the included rifle-length M16A4 action spring and the BCM MK2 buffer to function correctly. Standard carbine buffers and springs will not work, which is exactly why those matched components come in the kit.
What does the MK2 buffer system actually do for felt recoil?
The longer receiver extension lets the system use a rifle-length spring and a heavier buffer with more internal counterweight travel. That spreads the recoil impulse out and reduces bolt bounce, so the gun cycles smoother and stays flatter. Behind an optic, it makes it easier to track your hits and get back on target for faster follow-ups.
Will the BCM Mod 2 Widebody Stock Kit fit an AR-10 or just AR-15 builds?
It installs on standard Mil-Spec AR-15 lowers and also works on most AR-10 platforms. The MK2 extension is optimized for intermediate-length setups like MK2, AR10, and A5 configurations. Keep in mind the tube is slightly longer than a carbine tube, so some Mil-Spec stocks may not fully collapse, though the Mod 2 stock is matched to it.





Reviews
There are no reviews yet.