Description
Barrett took everything that made the MRAD a favorite among precision rifle folks and asked a fair question: what if you don't need to swap calibers? The answer is the SMR, short for Single Mission Rifle. It shares roughly 90 percent of its parts with the standard MRAD and carries the same .75 MOA accuracy standard, but it comes from the factory set up in one caliber with a free-floated barrel held in the upper receiver by a conventional barrel nut. Skipping the caliber conversion hardware trims close to two and a half pounds off the standard MRAD, so you get a leaner rifle that still feels every bit like a Barrett.
What the MRAD SMR Brings to the Bench
This version is chambered in .300 Winchester Magnum with a 26-inch fluted barrel and a 1:8 twist, which gives heavy match bullets the velocity and stability they need to stay supersonic way out past where most rifles give up. A two-port muzzle brake comes installed and the system is suppressor capable if you go that route later. The monolithic upper is machined from 7000-series aluminum with a full-length M1913 Picatinny rail up top, plus a 21.75-inch handguard section for night vision, laser units, or a bipod. The bolt rides in an enclosed polymer bolt guide that keeps the action running smooth even when dust and grit would bind a tighter traditional design.
Fixed Stock, Adjustable Where It Counts
The non-folding stock is the SMR's signature, and it's not a downgrade so much as a simplification. You still get a tool-free adjustable cheek piece and spacers for length of pull, so dialing in a repeatable position behind the scope is quick. The match-grade trigger module is user adjustable, the thumb safety and magazine release are set up for ambidextrous use, and the Magpul MOE grip can be swapped for most M4-pattern grips. The whole rifle wears Flat Dark Earth Cerakote that shrugs off weather and hard field use.
Why Pick the SMR Over the Standard MRAD
If your rifle is going to live its life in .300 Win Mag, there's little reason to pay for barrel-swap capability you'll never use. The SMR delivers the same downrange performance in a lighter, slightly shorter package, and it ships with a 10-round magazine so you're ready to get to work from day one.
Key Specifications
- Manufacturer: Barrett Firearms
- Model: MRAD SMR (Single Mission Rifle)
- Manufacturer Part Number: 18512
- UPC: 810021510781
- Caliber: .300 Winchester Magnum
- Action: Bolt Action
- Barrel Length: 26", fluted, free-floated
- Twist Rate: 1:8
- Muzzle Device: 2-Port Muzzle Brake, suppressor capable
- Overall Length: 48.5"
- Capacity: 10 rounds
- Stock: Fixed with adjustable cheek piece and length of pull spacers
- Grip: Magpul MOE, accepts most M4/M16 pattern grips
- Handguard Rail Length: 21.75"
- Finish: Flat Dark Earth Cerakote
- Trigger: User-adjustable match-grade trigger module
What’s Included
- Barrett MRAD SMR rifle
- One 10-round magazine
Frequently Asked Questions
What's the difference between the MRAD SMR and the standard Barrett MRAD?
The SMR is a single-caliber version of the MRAD, so it doesn't use the caliber conversion system. Its free-floated barrel is held in the upper with a standard barrel nut and the stock is fixed rather than folding. Dropping that hardware cuts nearly 2.5 pounds and about an inch of overall length while keeping around 90 percent parts commonality and the same .75 MOA accuracy standard.
Is the fixed stock on the MRAD SMR adjustable at all?
Yes. While it doesn't fold, the cheek piece adjusts vertically without tools so you can get consistent eye alignment behind your optic, and length of pull is adjusted with spacers. That covers the fit adjustments most precision work calls for.
Can I run a suppressor on the Barrett MRAD SMR .300 Win Mag?
You can. The SMR ships with a two-port muzzle brake, and Barrett's SMR brakes are designed to be suppressor capable, so adding a compatible can down the road is a straightforward upgrade rather than a gunsmithing project.
Does this rifle come with sights or an optic?
No, it ships optic ready with no sights installed. The full-length M1913 Picatinny top rail gives you plenty of real estate for a long-range scope and mount, and the 21.75-inch handguard rail handles accessories like a bipod or night vision gear. Given what this rifle is built to do, plan on pairing it with quality glass.



Reviews
There are no reviews yet.