Description
The Barrett MRAD, which stands for Multi-Role Adaptive Design, is a bolt-action precision rifle that was originally developed to meet the stringent requirements of the U.S. Special Operations Command Precision Sniper Rifle program. USSOCOM ultimately selected the MRAD platform as their Mk 22 Advanced Sniper Rifle, specifically chambered in .338 Norma Magnum, .300 Norma Magnum, and 7.62x51mm. This particular version, part number 18481, is the .338 Norma Magnum configuration with a 26-inch fluted barrel and a Black Cerakote finish on the folding stock model.
The .338 Norma Magnum is worth understanding if you're comparing it to the more widely known .338 Lapua. The Norma cartridge was designed specifically to optimize performance with heavy, high-BC 300-grain bullets in actions and magazines with a standard maximum overall length. It runs a slightly shorter case than the Lapua with less taper, which allows those heavier, longer VLD bullets to seat further out and perform at their best. Real-world ballistics between the two are very close at most distances, but the Norma edges ahead when running 300-grain bullets at extended ranges, and it produces slightly less felt recoil than the Lapua.
The MRAD's monolithic upper receiver is machined from 7000-series aluminum and incorporates a full-length M1913 Picatinny top rail with a built-in 20 MOA taper, giving you a head start on elevation adjustment before you even dial in your scope. The handguard features mounting slots at 3, 6, and 9 o'clock for rails, bipods, and electro-optics, while the bolt rides in a unique enclosed polymer guide that keeps it running smoothly even when conditions get rough. The match-grade trigger module is user-adjustable and can be removed from the lower receiver without any tools, making field maintenance and cleaning straightforward.
One of the MRAD's standout features is the user-changeable barrel system. Loosening two Torx bolts allows a full barrel swap without a gunsmith, and the whole process takes under two minutes. That means this rifle can be converted to other supported calibers down the road just by purchasing an additional barrel kit. The folding stock collapses to the right side to reduce the overall footprint for transport, and locks solid when extended. Length of pull and cheek piece height are both adjustable without tools, and the ambidextrous paddle magazine release along with the left/right swappable thumb safety make it just as workable for lefties as it is for right-handed shooters.
This rifle ships with two 10-round steel magazines, two sling loops, three accessory rails, and a Pelican hard carrying case. It weighs 14.5 pounds and measures 49.4 inches overall.
Key Specifications
- Manufacturer: Barrett Firearms
- Model: MRAD Folding Stock
- MPN: 18481
- UPC: 810021510477
- Caliber: .338 Norma Magnum
- Action: Bolt Action
- Barrel Length: 26 inches (660 mm)
- Barrel Profile: Fluted
- Barrel Twist: 1:9.4 inches (240 mm)
- Overall Length: 49.4 inches (1,255 mm)
- Weight: 14.5 lbs (6.6 kg)
- Magazine Capacity: 10 rounds
- Receiver Material: 7000-series aluminum, monolithic
- Receiver Finish: Black Cerakote
- Stock: Folding, tool-less adjustable LOP and cheek piece
- Top Rail: Full-length M1913 Picatinny with built-in taper
- Country of Manufacture: USA
What’s Included
- Barrett MRAD rifle (.338 Norma Magnum)
- (2) 10-round steel magazines
- (2) Sling loops
- (3) Accessory rails
- Pelican hard carrying case
Frequently Asked Questions
What is the difference between .338 Norma Magnum and .338 Lapua Magnum?
The .338 Norma Magnum was specifically designed to get the most out of heavy 300-grain VLD bullets in actions limited to a standard overall cartridge length, using a shorter case with less body taper to allow those long bullets to seat further out. Ballistically, the two cartridges are very close at most distances, but the Norma has a slight edge when running heavier, higher-BC projectiles at extended ranges and generally produces a bit less felt recoil. The Lapua still has a broader ammo selection and wider availability, while the Norma is the cartridge USSOCOM specifically chose for the Mk 22 Advanced Sniper Rifle program.
Can I swap barrels on the Barrett MRAD myself without a gunsmith?
Yes, that is one of the core design features of the MRAD platform. Loosening two Torx bolts allows the barrel to be removed from the front of the receiver, and the entire swap can be completed in under two minutes. Each barrel comes with its own factory headspaced bolt face, so in some cases you will also swap the bolt head and magazine depending on the caliber. No gunsmith is required.
What other calibers can the Barrett MRAD be converted to?
The standard MRAD platform supports .338 Lapua Magnum, .338 Norma Magnum, .300 Norma Magnum, .300 PRC, 7mm PRC, .300 Winchester Magnum, .308 Winchester, and 6.5 Creedmoor through the user-changeable barrel system. Caliber conversion kits are available separately from Barrett and allow the same lower receiver to be used across a wide range of applications. This makes it genuinely practical to run a less expensive training caliber like .308 or 6.5 Creedmoor and then switch back to .338 Norma Magnum for serious long-range work.
Is the Barrett MRAD accurate enough for 1,000-yard shooting?
The MRAD is rated for sub-MOA accuracy and the platform has been extensively validated at extreme distances, including its selection as the U.S. military's Mk 22 Advanced Sniper Rifle. The 26-inch fluted barrel in .338 Norma Magnum is optimized for the heavy, high-BC bullets that this cartridge is designed for, and the full-length tapered Picatinny rail gives you plenty of elevation capacity to work with at extended ranges. Paired with a quality optic and match-grade ammunition, this rifle is well-equipped for precision work well past the 1,000-yard mark.
Does the folding stock affect shooting stability on the Barrett MRAD?
No. The stock folds to the right side for transport and storage, but when extended it locks securely into place and is described as every bit as rigid as a fixed-stock rifle. The chassis-style design with the in-line stock geometry also helps keep the recoil path flat, which aids consistency when shooting off bipods or bags. The length of pull and cheek piece height are both adjustable without tools so you can dial in the fit before getting behind the optic.
What optics mounting options does the MRAD have?
The monolithic upper receiver includes a full-length M1913 Picatinny top rail that measures approximately 21.75 inches and has a built-in taper for long-range elevation correction. The handguard also has mounting slots at the 3, 6, and 9 o'clock positions for attaching additional rails, bipods, night vision, and other accessories. The bottom of the buttstock includes an M1913 rail for mounting a rear monopod if needed.




Reviews
There are no reviews yet.