Description
Barrett built its name on rifles that reach way out there, and the MRAD SMR keeps that tradition going without the extra complexity. SMR stands for Single Mission Rifle, and the idea is simple: take the award-winning MRAD platform, set it up from the factory in one caliber, and trim away the barrel-swap hardware most owners never touch. What you get is a leaner rifle that still shares roughly 90 percent of its parts with the standard MRAD and carries the same .75 MOA accuracy standard.
Why the MRAD SMR in .300 PRC Makes Sense
The .300 PRC cartridge was designed from the ground up for long, heavy-for-caliber bullets, and it pairs beautifully with the SMR's 26 inch fluted barrel and 1:8 twist. The barrel is fully free floated and secured in the upper receiver with a standard barrel nut, and a two-port muzzle brake up front takes real bite out of recoil so you can spot your own impacts. The monolithic upper is machined from 7000-series aluminum with a full-length M1913 Picatinny rail that has taper built in, which leaves you plenty of elevation for stretching past a thousand yards.
Fixed Stock, Repeatable Results
Instead of the folding stock on the standard MRAD, the SMR runs a fixed stock that gives you a rock-solid cheek weld and keeps chassis movement to a minimum between shots. It is still adjustable where it counts, with a vertically adjustable cheek piece and spacers to dial in length of pull. The bolt rides in an enclosed polymer bolt guide for a smooth, grit-resistant stroke, and the match-grade trigger module is user adjustable so you can set the pull exactly how you like it. A Magpul MOE grip and Tungsten Grey Cerakote finish round out the package.
Feeding the Barrett SMR
The rifle ships with one 10-round magazine, giving you plenty on tap for match stages or a long afternoon of data gathering. At 12.3 pounds bare, it settles nicely into bags and barricades, right at home in precision matches, ELR practice, or any place a flat-shooting .30 magnum earns its keep.
Key Specifications
- Manufacturer: Barrett Firearms
- Model: MRAD SMR (Single Mission Rifle)
- Manufacturer Part Number: 18930
- UPC: 810021511030
- Caliber: .300 PRC
- Action: Bolt Action
- Barrel Length: 26" Fluted, Free-Floated
- Twist Rate: 1:8"
- Muzzle Device: 2-Port Muzzle Brake
- Capacity: 10 Rounds
- Stock: Fixed, Adjustable Cheek Piece with LOP Spacers
- Grip: Magpul MOE
- Finish: Tungsten Grey Cerakote
- Weight: 12.3 lbs
- Overall Length: 48.5"
- Accuracy Standard: .75 MOA
What’s Included
- Barrett MRAD SMR rifle
- One 10-round magazine
- Owner's manual
Frequently Asked Questions
Can I swap barrels on the MRAD SMR like the standard MRAD?
No, and that is the whole point of the SMR. The Single Mission Rifle comes from the factory set up in one caliber, without the user-changeable barrel system of the standard MRAD. The free-floated barrel is held in the upper with a standard barrel nut, and the rifle still shares about 90 percent of its parts with the regular MRAD.
Is the fixed stock on the Barrett MRAD SMR adjustable at all?
Yes. While the stock does not fold, it has a vertically adjustable cheek piece and uses spacers to fine-tune length of pull. The fixed design gives you a very stable rear contact point, which helps keep the rifle settled and speeds up recovery between shots.
How accurate is the MRAD SMR in .300 PRC?
Barrett holds the SMR to the same .75 MOA accuracy standard as the standard MRAD. Paired with the 26 inch fluted barrel, 1:8 twist, and quality match ammo loaded with heavy .30 caliber bullets, this rifle is fully capable of consistent hits well past 1,000 yards.
Does the MRAD SMR come suppressor ready?
It ships with a two-port muzzle brake mounted on a threaded barrel, so removing the brake gives you access to the threads for a direct-thread suppressor or a compatible mount. The brake itself does a great job taming .300 PRC recoil if you prefer to run it as-is.




Reviews
There are no reviews yet.