Description
Swapping a barrel or breaking loose a stubborn muzzle brake is a lot less of a fight when you've got the right vise holding things steady. The Viper Bench Rest Barrel Vise is machined from 6061 aluminum with a bottom half that runs a full inch thick, giving you the beef you need when it's bolted down and you're leaning into a wrench. It handles barrels from .75" all the way up to 1.375" in diameter, which covers just about everything from lightweight sporters to heavy match profiles.
What Makes the Viper Barrel Vise Grip So Well
The real trick here is the powder coat finish. Instead of fussing with leather, cardboard, or spacers for most jobs, the coating bites down on the barrel and holds like a gorilla without leaving marks on blued or stainless steel. All four hardened, threaded bolts ride on captured support springs, so the top plate stays put during barrel insertion and removal instead of flopping around and testing your patience.
Setting Up Your Viper Bench Rest Vise
The base measures 7" x 3" with mounting holes spaced 5.750" center to center at 9/16" diameter, so it drops onto a workbench with standard hardware. The top plate is 3" square and clamps down with four 1/2" bolts. Plenty of folks mount it straight to a chunk of 4×4 lumber or drop it into a bench vise when they want it out of the way. Just keep torque on the vise nuts at or below 50 ft/lbs and skip the impact gun, and this thing will serve you for years.
Gunsmiths and home builders alike lean on this vise for barrel nut removals, handguard swaps, and muzzle device work on rifles like the Ruger Precision and Remington 700. It earns a strong reputation for sturdy construction, a precise grip, and holding barrels dead still through tough jobs. For Cerakote, painted, or carbon fiber barrels, a wrap of drywall tape or a paper towel core is the smart move to protect the finish.
Key Specifications
- Manufacturer: Viper Bench Rest
- Manufacturer Part Number: BV
- UPC: 700358214011
- Material: 6061 Aluminum
- Barrel Diameter Range: 0.75" to 1.375" OD
- Base Dimensions: 7" x 3"
- Base Thickness: 1"
- Top Plate: 3" square
- Clamping Bolts: Four 1/2" bolts
- Mounting Hole Diameter: 9/16"
- Mounting Hole Spacing: 5.750" center to center
- Max Torque: 50 ft/lbs on vise nuts
- Finish: Powder coat (standard red top, black base)
What’s Included
- Viper Bench Rest Barrel Vise (base and standard top plate)
- Four hardened clamping bolts with captured support springs
Frequently Asked Questions
What size barrels will the Viper barrel vise hold?
The standard Viper Barrel Vise grips barrel diameters from .75" up to 1.375" outside diameter. That range covers most sporter, tactical, and heavy match profiles. If you need to go smaller, Viper offers a rimfire/sporter top that reaches down to about .500".
Will the barrel vise mark or damage my barrel?
The powder coat finish is designed to grip firmly on blued and stainless barrels without leaving marks. For Cerakote, painted, or carbon fiber barrels, wrapping the barrel with drywall tape or a paper towel core is recommended to protect the finish. Carbon fiber sections in particular should always be wrapped or avoided since clamping pressure can crush them.
How do I mount the Viper Bench Rest Barrel Vise?
The base has 9/16" mounting holes spaced 5.750" center to center, so it bolts to a workbench with standard hardware. Some users mount it directly to a 4×4 or drop it into a separate bench vise so it can be tucked away when not in use. Viper also makes a dedicated bench vise mount if you'd rather not drill your benchtop.
Can I use an impact wrench with this barrel vise?
No, Viper recommends against using an impact gun on the vise nuts. Keep torque at or below 50 ft/lbs and use a hand wrench or breaker bar instead. Sticking to that keeps the vise and its powder coat finish holding strong for the long haul.




Reviews
There are no reviews yet.