Description
The Barnes TTSX (Tipped Triple-Shock X) in .338 caliber is a 225-grain, solid-copper hunting bullet that handloaders reach for when they want deep penetration and dependable terminal performance. Because the body is machined from a single piece of copper with no lead core to come apart, the TTSX holds onto nearly all of its weight on impact and drives straight through heavy bone and muscle. The polymer tip up front does two jobs at once: it raises the ballistic coefficient to 0.514 for flatter flight downrange, and it plugs the hollow nose cavity so expansion kicks off fast and reliably every time.
What Sets the .338 TTSX Apart
On impact, the nose peels back into four razor-sharp copper petals that open up to roughly double the original diameter. That means a wide wound channel and quick, clean kills, while the rest of the shank keeps pushing forward for full penetration. The multiple grooves cut into the shank aren't for seating depth. They're relief rings that give displaced copper somewhere to go, which helps keep pressures down and reduces the copper fouling that older solid bullets were known for. With a .338 diameter, a 225-grain weight, and a sectional density of 0.281, this bullet is right at home on elk, moose, big bears, and plains game.
Loading the Barnes 225gr Tipped TSX
Barnes recommends starting around 0.050 inches off the lands and tuning from there, since monolithic bullets tend to like a bit more jump than cupped-and-core designs. From that starting point, most folks work the powder charge first to find an accuracy node, then fine-tune seating depth in small steps. Keep in mind the relief grooves are for pressure, not seating reference, so let your rifle's throat and magazine length guide your final overall length. A touch of patience during load development pays off with tight groups and the kind of hard-hitting, lead-free performance the TTSX is known for.
Key Specifications
- Manufacturer: Barnes
- Model: Tipped TSX (TTSX)
- Manufacturer Part Number: 30430
- UPC: 716876338795
- Caliber: .338 Caliber
- Bullet Diameter: 0.338 inch
- Bullet Weight: 225 Grain
- Bullet Style: Tipped Triple-Shock X Boat Tail
- Tip Material: Polymer
- Core / Jacket Material: Solid Copper
- G1 Ballistic Coefficient: 0.514
- Sectional Density: 0.281
- Lead Free: Yes
- Recommended Use: Hunting medium and large game
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TTSX .338 caliber 225-grain Tipped TSX boat tail bullets (projectiles only, not loaded ammunition)
Frequently Asked Questions
Are the Barnes TTSX .338 225gr bullets loaded ammunition?
No, these are reloading projectiles only. You supply your own brass, primers, and powder to assemble finished cartridges. They are not ready-to-fire ammunition.
What game is the .338 225gr TTSX best suited for?
This bullet is built for medium and large game, and the .338 caliber 225-grain weight pairs well with elk, moose, big bears, and larger plains game. The solid-copper construction gives you deep penetration and nearly 100 percent weight retention, so you get a straight, reliable wound channel on heavy animals.
How should I seat the Barnes 225gr Tipped TSX for best accuracy?
Barnes recommends starting around 0.050 inches off the lands and adjusting from there. Monolithic copper bullets generally prefer a bit more jump than lead-core designs, so work your powder charge first, then fine-tune seating depth in small increments. The grooves on the shank are pressure-relief rings, not a seating-depth reference.
Why does the TTSX have grooves cut into the body?
The relief grooves give displaced copper a place to go as the bullet travels down the bore. This helps lower chamber pressure and cuts down on the copper fouling that earlier all-copper bullets were known for, which keeps your barrel cleaner over long range sessions.







Reviews
There are no reviews yet.