Description
The Barnes TSX in .375 caliber is a 350-grain, all-copper hunting bullet that has earned its reputation on the kind of game that doesn't go down easy. Made from 100 percent copper with no lead core, it resists fragmentation and holds onto nearly all of its original weight, which is exactly what you want when you're putting a big bullet through heavy bone and thick muscle. On impact the nose peels back into four razor-sharp copper petals, cutting a wide wound channel while the shank keeps driving forward for the deep, straight-line penetration the TSX is known for.
What Makes the .375 TSX Tick
This is the same Triple-Shock design that made Barnes a household name among handloaders. Multiple grooves are cut into the bullet shank, and those rings act like relief valves as the bullet travels down the bore. The payoff is reduced pressure, less copper fouling, and better accuracy than you'd expect from a solid copper projectile. With a 0.375 inch diameter, a 1.691 inch length, a sectional density of 0.356, and a G1 ballistic coefficient of 0.425, this 350-grain flat base is well suited to the .375 H&H Magnum and other .375 chamberings built for large and dangerous game.
Loading the Barnes TSX .375 350-Grain
Copper bullets reward a little attention at the loading bench. Barnes recommends an initial seating depth of 0.050 inches off the lands, with best accuracy typically landing somewhere between 0.030 and 0.070 inches depending on your rifle. The smart move is to build a seating depth ladder and let your barrel tell you what it likes. Experienced handloaders also note that these copper bullets shoot best out of a clean bore, so scrub out any old fouling before you start a work-up. Because copper is longer than lead for the same weight, expect your charge and overall length to behave a bit differently than a traditional cup-and-core bullet of the same grain weight.
These are component bullets for reloading, not loaded ammunition. For anyone chasing elk, moose, big bears, or plains game with a .375, this is a proven choice that penetrates deep and stays in one piece.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30494
- UPC: 716876375608
- Caliber: .375 Caliber
- Bullet Diameter: 0.375 in
- Bullet Weight: 350 Grain
- Bullet Style: TSX Flat Base, Solid Hollow Point
- Construction: 100% Copper, Lead Free
- Ballistic Coefficient (G1): 0.425
- Sectional Density: 0.356
- Bullet Length: 1.691 in
- Coating: Non-Coated
- Quantity: 50 per Box
- Country of Origin: USA
What’s Included
- 50 Barnes TSX .375 caliber 350-grain flat base reloading bullets
Frequently Asked Questions
What game is the Barnes TSX .375 350-grain best suited for?
This bullet is built for large and tough game where deep, reliable penetration matters. The all-copper construction holds together through heavy bone and muscle, making it a strong pick for elk, moose, big bears, and African plains and dangerous game out of a .375 H&H Magnum or similar chambering. Its high weight retention means it keeps driving straight even on angled shots.
What seating depth does Barnes recommend for the .375 TSX?
Barnes recommends starting around 0.050 inches off the lands. Best accuracy usually falls somewhere between 0.030 and 0.070 inches depending on your rifle, so building a seating depth ladder is the way to dial it in. Many handloaders adjust in small increments from that 0.050 starting point until groups tighten up.
Do these copper bullets foul the barrel more than lead-core bullets?
The TSX design cuts grooves into the shank that help reduce fouling compared to older all-copper designs. That said, these bullets shoot best out of a clean bore, so it's worth scrubbing out any existing copper or fouling before your load work-up. A good copper solvent and a clean start go a long way toward consistent accuracy.
Is this loaded ammunition or component bullets?
These are component bullets intended for reloading only, not loaded cartridges. You'll supply your own brass, primers, and powder to assemble finished rounds. Each box contains 50 projectiles.





Reviews
There are no reviews yet.