Description
Barnes built its reputation on all-copper projectiles, and the Tipped TSX is where that proven design meets a streamlined polymer tip. This 50-grain .224 flat base version is a lead-free, one-piece copper bullet with multiple rings cut into the shank to cut down on fouling and pressure. The polymer tip raises the ballistic coefficient and gets expansion started the instant the bullet hits, so you're getting cleaner performance without giving up the deep penetration Barnes is known for.
What Sets the TTSX .224 50 Grain Apart
On impact, the nose peels back into four razor-sharp copper petals that open to roughly double the bullet's diameter while the shank keeps driving forward. Because there's no lead core to shed, these hold onto nearly all of their weight, which means consistent terminal results on game and reliable penetration shot after shot. The G1 ballistic coefficient sits at 0.229 with a sectional density of 0.142, numbers that keep this little 50-grainer flying flat and hitting hard downrange.
Loading the 50-Grain TTSX Flat Base
This bullet runs best out of a 1-in-12 twist barrel or faster, making it a natural fit for a lot of .22 centerfire rifles built around varmint and predator work. The flat base design is forgiving to seat and meters nicely during load development. A tip worth keeping in mind with monolithic copper bullets like these: they tend to shoot their tightest groups when you experiment with seating depth and back off the lands a bit, so don't be shy about working up your load.
Why Reloaders Reach for the Barnes TTSX
For handloaders who want a non-lead option that doesn't compromise on accuracy, the Tipped TSX has earned its spot. The copper construction reduces barrel fouling, the design squeezes out a little extra velocity, and the overall package gives you a dependable hunting bullet you built yourself. Keep in mind these are component projectiles for reloading and are not loaded ammunition.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30185
- UPC: 716876224524
- Bullet Style: TTSX Flat Base (FB), Polymer Tip
- Caliber: .22 Caliber
- Diameter: .224 in
- Bullet Weight: 50 Grain
- Ballistic Coefficient (G1): 0.229
- Sectional Density: 0.142
- Bullet Material: 100% Copper, Lead-Free
- Recommended Twist Rate: 1 in 12 in or faster
- Quantity: 50 Count
What’s Included
- 50 Barnes TTSX .224 50 gr flat base reloading bullets (projectiles only, not loaded ammunition)
Frequently Asked Questions
Are the Barnes TTSX .224 50 gr loaded cartridges or just bullets?
These are component bullets (projectiles) for reloading only. They are not loaded ammunition and cannot be fired as-is. You'll need to handload them with your own brass, primer, and powder.
What twist rate do I need for the 50-grain TTSX?
Barnes recommends a 1-in-12 twist or faster to stabilize this 50-grain .224 bullet. Most .22 centerfire varmint and predator rifles fall right in that range, so stabilization usually isn't an issue.
Why do monolithic copper bullets like the TTSX sometimes need load tuning?
All-copper bullets are typically a touch longer than lead-core bullets of the same weight and can be sensitive to seating depth. Many reloaders find their best groups by backing the bullet off the lands and adjusting powder charge during load development. A little experimentation goes a long way with these.
Is the Barnes TTSX .224 50 gr lead-free?
Yes. It's a 100-percent copper, lead-free projectile. The copper construction also helps cut down on barrel fouling and holds onto nearly all of its weight on impact.




Reviews
There are no reviews yet.