Description
Barnes built the Match Burner line for folks who want serious accuracy out of a component bullet without stepping up to boutique prices. This 6.5mm (.264") 145 grain version is a lead-core, open-tip boat tail projectile that was designed with competition and precision target work in mind. If you shoot a 6.5 Creedmoor, 6.5 PRC, 260 Rem, or any other .264 cartridge, this is a bullet worth working into your load data.
The numbers are what make this one stand out. It carries a G1 ballistic coefficient of .703 with a sectional density of .297, which is a big part of why it holds velocity downrange and shrugs off wind the way it does. The boat tail base helps it stay stable through the full flight, and at 1.468 inches long it runs best out of a 1:8" twist or faster barrel to keep everything spinning true.
What the 145 Grain Match Burner Brings to the Bench
Weight placement matters with a heavy-for-caliber 6.5 bullet, and this one splits the difference nicely between staying supersonic at distance and keeping recoil manageable. The open-tip construction and consistent jacket give you the concentricity handloaders chase when they're chasing small groups. There's no cannelure, so you've got freedom to set your seating depth where your rifle likes it.
Why Reloaders Keep Reaching for Match Burners
The appeal here is simple. You get match-grade behavior that competes with pricier target bullets, which makes it easy to shoot a lot during load development and practice without feeling like every round out the barrel is costing you. Tactical, 3-Gun, High Power, and PRS-style shooters have all found a home for these, and plenty of handloaders run them for everyday range time too.
Keep in mind this is a component bullet, not loaded ammunition, so you'll be supplying your own brass, powder, and primers. Pair it with a good load recipe and a barrel with the right twist, and the Match Burner gives you a lot of downrange performance for what it is.
Key Specifications
- Manufacturer: Barnes
- Caliber: 6.5mm (.264")
- Bullet Diameter: .264"
- Bullet Weight: 145 Grain
- Bullet Type: Boat Tail Match (Open Tip)
- G1 Ballistic Coefficient: 0.703
- Sectional Density: 0.297
- Bullet Length: 1.468"
- Recommended Twist Rate: 1:8" or faster
- Core Material: Lead
- Jacket Material: Copper
- Cannelure: No
- Lead Free: No
- Quantity: 500 per box
- Manufacturer Part Number: 30102
- UPC: 716876264087
What’s Included
- 500 Barnes Match Burners 6.5mm (.264") 145 grain boat tail match bullets (component bullets only, not loaded ammunition)
Frequently Asked Questions
Are the Barnes Match Burners loaded ammunition or just the bullets?
These are component bullets only, not loaded rounds. You'll need to supply your own brass, powder, and primers to load them. They're intended for handloaders building their own match or practice ammunition.
What barrel twist rate works best for the 145 grain 6.5mm Match Burner?
Barnes recommends a 1:8" twist or faster to properly stabilize this bullet. At 1.468 inches long, it needs that faster spin to stay accurate at distance. Most modern 6.5 Creedmoor and 6.5 PRC barrels fall right in that range.
What cartridges can I load the 6.5mm Match Burner in?
Any .264 caliber cartridge will take this bullet, including 6.5 Creedmoor, 6.5 PRC, 260 Remington, and 6.5×55 Swede, among others. Just make sure your load data matches your specific case and your barrel has a suitable twist. Always work up loads from published data.
Is the 145 grain Match Burner a good choice for long-range shooting?
It is. With a G1 BC of .703 and a sectional density of .297, it holds velocity well and resists wind drift at distance. That's a big reason competitive and precision shooters favor the heavier 6.5 Match Burner for long-range work.




Reviews
There are no reviews yet.