Description
The Barnes TSX (Triple-Shock X) in 8mm is one of those bullets that earned its reputation the hard way, by putting game down cleanly, year after year. This .323 diameter, 180-grain boat-tail is machined from 100 percent copper with no lead core, so it holds together through bone and heavy muscle instead of shedding weight on the way in. On impact the nose peels back into four razor-sharp petals that cut a wide wound channel, and because there's no jacket to separate from a core, you get the deep, straight-line penetration the TSX line is known for.
What Sets the Barnes TSX 8mm Apart
The secret is in the grooves cut around the shank. Those rings give displaced copper somewhere to go as the bullet travels down the bore, which cuts fouling, trims pressure, and lets you push for a little more velocity. The result is an all-copper bullet that tends to shoot tighter and foul less than you'd expect from a solid. With a G1 ballistic coefficient of .381 and a sectional density of .246, this 180-grain pill carries energy well and bucks wind better than a flat-base of the same weight.
Loading the 180-Grain TSX Boat-Tail
Since this is a component bullet and not loaded ammo, it's meant for handloaders working up 8mm Mauser (7.92×57) and similar .323 cartridges. Barnes copper bullets run a touch longer than lead-core bullets of the same weight, so they like a bit more jump to the lands. A good starting point is seating around 0.050 inches off the rifling, then tuning anywhere from roughly 0.030 to 0.070 inches to find the sweet spot in your particular barrel. Work your loads up from published Barnes data and you'll usually land on a tight group without much fuss.
For anyone chasing clean kills and reliable expansion out of an old military Mauser or a modern 8mm build, this is a proven, hard-hitting choice that performs when it counts.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30396
- UPC: 716876323067
- Bullet Style: TSX Boat-Tail (Triple-Shock X)
- Caliber: 8mm (.323")
- Bullet Diameter: 0.323"
- Bullet Weight: 180 Grain
- Bullet Length: 1.289"
- Tip Material: Hollow Point
- Core/Jacket Material: Solid Copper
- Ballistic Coefficient (G1): .381
- Sectional Density: .246
- Quantity: 50 Per Box
- Country of Origin: USA
What’s Included
- 50 Barnes TSX 8mm (.323") 180 gr Boat-Tail bullets
Frequently Asked Questions
What cartridges can I load the Barnes TSX 8mm 180 gr bullet in?
This .323 diameter bullet is designed for 8mm cartridges, most commonly the 8mm Mauser (7.92×57). Any cartridge that uses a .323 bullet and can handle a 180-grain projectile is fair game. Always build your loads using Barnes published reloading data for the specific case you're using.
Is the Barnes TSX 8mm lead-free?
Yes. The TSX is machined from 100 percent copper with no lead core, which is part of why it holds nearly all of its weight and penetrates so deep. That also makes it a solid option in areas that call for non-lead hunting bullets.
How should I seat the 180 gr TSX for best accuracy?
Barnes recommends starting around 0.050 inches off the lands, then adjusting seating depth between roughly 0.030 and 0.070 inches to dial in your rifle. Copper bullets like a bit more jump than lead-core bullets, so some experimentation pays off. Most shooters find a tight node within that range.
Does the TSX bullet foul the barrel like other all-copper bullets?
The engineered grooves cut into the shank give displaced copper room to move as the bullet goes down the bore, which keeps fouling low. That design also helps reduce pressure and improve accuracy compared to a plain solid. A standard copper-removing cleaning routine keeps the bore in good shape.




Reviews
There are no reviews yet.