Description
Barnes built the TAC-TX line to solve a real problem for the .300 Blackout crowd: a lot of standard .30-caliber bullets are designed for higher-velocity cartridges and don't open up reliably when driven slower. These 120-grain all-copper projectiles are engineered specifically for the velocity window the .300 Blackout works in, including short-barreled and suppressed setups, so you get dependable expansion whether you're punching subsonic or supersonic loads downrange. The copper tip cavity and sharp meplat get expansion started, and because there's no lead core to come apart, you hold onto nearly all your projectile weight on the far side of hide, bone, and the occasional barrier.
Why Handloaders Reach for the TAC-TX 120 Grain
The all-copper construction is the heart of the appeal here. With a ballistic coefficient of .358 (G1), a sectional density of .181, and a measured overall length of 1.245 inches, this .308-diameter bullet carries a predictable, stable profile that reloaders can build consistent recipes around. Barnes designs these to track straight through intermediate barriers and hold together, which is why the TAC-X family earned its following with hunters and in military and law enforcement circles long before it got a polymer tip.
Loading the Barnes TAC-TX for .300 Blackout
This is a component bullet, not loaded ammunition, so it's meant for your press and your data. The 120-grain weight is a sweet spot for supersonic .300 Blackout loads out of AR-15 platforms, and the copper build keeps fouling down since you're not smearing lead through the bore. As with any monolithic Barnes bullet, pay attention to seating depth and give it a little jump; work your charges up from published Barnes data and you'll find these reward careful handloading with tight groups and clean terminal performance in the field.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30320
- UPC: 716876308125
- Bullet Line: TAC-TX
- Caliber: .300 AAC Blackout (.30 Caliber)
- Bullet Diameter: .308"
- Bullet Weight: 120 grain
- Construction: All-copper, lead-free, polymer tip
- Ballistic Coefficient (G1): 0.358
- Sectional Density: 0.181
- Overall Length: 1.245"
- Quantity: 50 per box
- Product Type: Component reloading bullets (not loaded ammunition)
- Country of Origin: USA
What’s Included
- 50 Barnes TAC-TX 120 gr .308 all-copper reloading bullets
Frequently Asked Questions
Are these Barnes TAC-TX 120 gr loaded rounds or just bullets?
These are component bullets only, meant for reloading. You'll supply your own brass, primers, and powder and load them on your press using published Barnes load data. There's no case, primer, or powder in the box.
What cartridge are these 120-grain TAC-TX bullets designed for?
They're built around the .300 AAC Blackout and share the standard .308 diameter. Barnes tuned this projectile to expand reliably at the velocities the .300 Blackout runs, including shorter barrels and suppressed setups, which is where a lot of ordinary .30-caliber bullets struggle to open up.
Why choose an all-copper bullet over a traditional lead-core design?
The monolithic copper build holds together far better on impact, giving you near-full weight retention and straight-line penetration through barriers. It also keeps lead out of the equation and tends to foul the bore less. The polymer tip boosts the ballistic coefficient and helps kick off expansion.
Any tips for loading the Barnes TAC-TX for best accuracy?
Copper bullets like a little jump to the lands, so experiment with seating depth and start your charges low, working up from current Barnes data. These bullets have a reputation for rewarding careful handloading, so take your time dialing in a recipe and they'll group well for you.





Reviews
There are no reviews yet.