Description
Barnes built the Tipped Triple-Shock X on the bones of its legendary TSX, then added a streamlined polymer tip to sharpen up long-range performance. These are 100-percent copper, .277 diameter, 95-grain projectiles with a boat tail profile, packed 50 to a box. If you load for 6.8mm SPC, 6.8 Western, .270 Winchester, or anything else running a .277 bore, these give you a lead-free option that punches well above its weight on game.
The design is where these earn their keep. The solid copper body has multiple rings cut into the shank, which helps reduce fouling and pressure while the bullet rides the rifling. On impact, the polymer tip and re-engineered nose cavity get expansion started in a hurry, peeling back four razor-sharp copper petals that open to roughly double the original diameter. Because there's no lead core to shed, these hold onto nearly all of their weight and drive straight through, which is exactly what you want when you're chasing clean, quick kills on deer, hogs, and similar game.
What the 95gr TTSX Brings to Your .277 Loads
With a G1 ballistic coefficient of .292 and a sectional density of .177, this bullet carries energy well downrange for its weight class. The polymer tip keeps the nose from deforming in the magazine and adds a little aerodynamic efficiency, which translates to flatter flight and more retained velocity at distance.
Loading the Barnes TTSX 6.8mm
A quick note for anyone working these up on the bench: because copper bullets behave a bit differently than lead-core designs, Barnes suggests starting your seating depth around 0.050 inches off the lands and tuning from there. Give them a proper workup with your powder and rifle and you'll usually find an accuracy node without much fuss. These run best in barrels with a twist rate suited to the lighter .277 projectiles, so match them to your setup and they'll reward you with tight groups and dependable terminal work.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30271
- UPC: 716876277513
- Model: Tipped TSX (TTSX)
- Caliber: 6.8mm / .270 Caliber
- Bullet Diameter: .277
- Bullet Weight: 95 grain
- Bullet Type: TTSX Boat Tail
- Bullet Tip Material: Polymer
- Core / Jacket Material: Solid Copper (Lead-Free)
- Ballistic Coefficient (G1): 0.292
- Sectional Density: 0.177
- Cannelure: Yes
- Recommended Usage: Hunting
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TTSX 6.8mm (.277) 95gr Boat Tail bullets
Frequently Asked Questions
What calibers can I load the Barnes TTSX 6.8mm bullets in?
These are .277 diameter bullets, so they work in any cartridge running a .277 bore. That includes 6.8mm SPC, 6.8 Western, .270 Winchester, and .270 WSM. Just confirm your barrel's twist rate is suited to the lighter 95-grain weight for best accuracy.
Are these Barnes TTSX bullets lead-free?
Yes. The TTSX is built from 100-percent copper with no lead core, topped with a polymer tip. That all-copper construction is why the bullet holds onto nearly all of its weight after impact.
What seating depth does Barnes recommend for the TTSX?
Barnes suggests starting your load development with the bullet seated about 0.050 inches off the lands. Copper bullets can be a little picky about seating depth, so use that as a baseline and adjust until you find the accuracy node your rifle likes.
How well does the 95gr TTSX expand on game?
On impact the polymer tip and nose cavity drive fast expansion, opening four sharp copper petals that roughly double the bullet's diameter. Combined with near-total weight retention, that means deep penetration and a wide wound channel for clean, quick kills on deer-sized game and hogs.




Reviews
There are no reviews yet.