Description
Barnes built the Triple-Shock X around a simple idea: give hunters a bullet that drives deep, holds together, and shoots straight. This .224 diameter, 62 grain projectile is machined entirely from copper with no lead core to come apart, so it tends to retain close to all of its original weight even after punching through bone and heavy tissue. At impact it peels open into sharp cutting petals, which is what gives the TSX its reputation for clean, decisive terminal performance on game. With a sectional density of .177 and a G1 ballistic coefficient of .287, it carries energy well for a bullet in this class.
What Sets the Barnes TSX .224 Apart
The standout feature here is the Accu-Groove shank. Those multiple rings cut into the body act like relief valves as the bullet travels down the bore, which trims pressure, reduces copper fouling, and lets you push higher velocities without caking up the barrel. Reloaders who have fought copper buildup with other solids tend to appreciate how much cleaner these run. There's also a cannelure for a secure crimp and consistent seating, which is handy if you're loading for an AR or any application where bullet setback matters.
Loading the Barnes TSX 62 Grain Boat Tail
Since this is an all-copper bullet, it runs a touch longer than a lead-core projectile of the same weight, so pay attention to seating depth and give yourself room to work up to best accuracy. Barnes recommends a 1:9 twist or faster to stabilize the 62 grain pill properly, which covers most modern .223 and .22 caliber rifles. Bullet length runs right around 0.942 inches, so check your magazine length if you're loading for a repeater.
These are lead-free, making them a smart pick for hunters in areas that call for non-toxic projectiles or anyone who simply wants a cleaner, tougher bullet. Each box holds 50 ready to load into your own recipe.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30190
- UPC: 716876224609
- Model: TSX Boat Tail
- Caliber: .22 Caliber
- Bullet Diameter: .224
- Bullet Weight: 62 grain
- Bullet Type: Boat Tail Hollow Point
- Core Material: Copper Solid
- Jacket Material: Copper Solid
- Lead Free: Yes
- Cannelure: Yes
- Sectional Density: 0.177
- Ballistic Coefficient (G1): 0.287
- Bullet Length: 0.942 in
- Recommended Twist Rate: 1:9 or faster
- Quantity: 50 Per Box
- Recommended Usage: Hunting
- Country of Origin: USA
What’s Included
- 50 Barnes TSX .224 62 gr Boat Tail Hollow Point bullets
Frequently Asked Questions
What twist rate do I need to stabilize the Barnes TSX .224 62 gr?
Barnes recommends a 1:9 twist or faster for this 62 grain bullet. That covers the majority of modern .223 Remington and .22 caliber rifles, including most AR platforms. If your barrel is slower than 1:9, the bullet may not stabilize reliably.
Are these Barnes TSX bullets lead-free?
Yes. The TSX is machined entirely from copper with no lead core at all, which is part of why it holds together and retains close to its full weight on impact. That also makes it a solid choice for anyone who needs or prefers a non-toxic projectile for hunting.
Why does the Barnes TSX have those grooves cut into the shank?
Those are the Accu-Groove rings, and they do real work. As the bullet moves down the bore, the grooves act as relief valves that reduce pressure, cut down on copper fouling, and support higher velocity loads. The practical result is a cleaner barrel and better accuracy potential.
Do I need to adjust my load data for an all-copper bullet like this?
It's smart to treat copper bullets as their own category rather than swapping them one-for-one with lead-core projectiles. They run a bit longer for the weight and engage the rifling differently, so start low and work up while using published Barnes data for the TSX. Pay close attention to seating depth and overall length for best accuracy.




Reviews
There are no reviews yet.