Description
These are Barnes' 45 grain Triple-Shock X bullets in .224 diameter, machined from a single piece of solid copper with no lead core and no jacket to separate. That one-piece build is the whole reason the TSX earned its reputation. On impact the hollow point peels back into four sharp copper petals, and because there's no lead to shed, the bullet holds nearly all of its weight and drives deep. Barnes rates the TSX design for up to 28% deeper penetration than comparable lead-core bullets, which is exactly what you want when you're reaching for a light .22 projectile and need it to do real work.
What the Barnes TSX Rings Actually Do
Look closely at the shank and you'll see the Accu-Groove rings cut into the body. These aren't just for show. As the bullet travels down the bore, copper flows into those grooves instead of smearing against the rifling, which cuts down on copper fouling and eases pressure. Lower pressure means you can often push these to higher velocities, and the altered barrel harmonics tend to tighten up groups. This 45 grain carries a .188 ballistic coefficient and a .128 sectional density, with an overall length of 0.698 inches and a cannelure already rolled in.
Loading the TSX 45 Grain for Varmints and Predators
This weight is a favorite for .223 Remington, .222 Remington, .22-250 and similar .224 cases where a fast, tough bullet earns its keep on coyotes, prairie dogs, and other varmints. Because all-copper bullets run a touch longer than lead-core of the same weight, pay attention to your twist rate and seating depth. Barnes typically recommends starting around .050 inches off the lands and working from there, and published TSX load data is widely available for the common .22 centerfires. Keep in mind these are reloading components, not loaded ammunition.
They ship 50 bullets per box and reward the handloader who likes to tune a load and trust it in the field.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30176
- UPC: 716876224418
- Caliber: .22 Caliber
- Bullet Diameter: 0.224 in
- Bullet Weight: 45 Grain
- Bullet Style: TSX Flat Base Hollow Point
- Material: Lead-Free Solid Copper
- Ballistic Coefficient (G1): 0.188
- Sectional Density: 0.128
- Overall Length: 0.698 in
- Cannelure: Yes
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TSX .224 45gr flat base hollow point bullets (reloading components, not loaded ammunition)
Frequently Asked Questions
Are the Barnes TSX .224 45gr loaded rounds or just bullets?
These are reloading components only, not loaded ammunition. You get 50 copper projectiles per box to seat in your own brass with your chosen powder and primer. If you're not handloading, you'd want factory loaded ammo instead.
What is the Barnes TSX 45 grain best used for?
The 45 grain .224 TSX is a popular choice for varmint and predator work like coyotes and prairie dogs in cartridges such as .223 Remington and .22-250. The all-copper build holds together and penetrates deeply, so it performs well when you want a tough, fast bullet. It also makes a solid all-around handload for the common .22 centerfires.
Why do these Barnes TSX bullets have grooves cut into them?
Those are Barnes' Accu-Groove rings, and they give the copper somewhere to flow as the bullet moves down the barrel. The result is reduced copper fouling and lower pressure, which can let you load to higher velocities. The rings also help settle barrel harmonics for better accuracy.
Do I need to adjust seating depth for the all-copper TSX?
Yes, copper bullets tend to run a little longer than lead-core bullets of the same weight, so seating depth and twist rate matter. Barnes generally suggests starting around .050 inches off the lands and tuning from there. Always work up using published TSX load data for your specific cartridge.



Reviews
There are no reviews yet.